User Manual

5. Using On-Screen Menu

Selecting Signal Format [SIGNAL SELECT]

[COMPUTER]

Allowsyoutochoose[COMPUTER]foranRGBsourcesuchasacomputer,or[COMPONENT]foracomponent

videosourcesuchasaDVDplayer.Normallyselect[RGB/COMPONENT]andtheprojectorautomaticallydetectsa

componentsignal.Howevertheremaybesomecomponentsignalsthattheprojectorisunabletodetect.Ifthisis

thecase,select[COMPONENT].

[VIDEO]

This feature enables you to select composite video standards automatically or manually.

Factorydefaultsettingis[AUTO]andtheprojectorwillautomaticallydetectthevideostandard.

Inthecasewheretheprojectorhasdifcultydetectingthevideostandard,selecttheappropriatevideostandard

from the menu.

EnablingorDisablingWXGAMode[WXGAMODE]

Selecting[ON]willgiveprioritytoWXGA(1280×768)/WUXGA(1920×1200)signalsinrecognizinganinputsignal.

When[WXGAMODE]issetto[ON],XGA(1024×768)/UXGA(1600×1200)signalsmaynotberecognizedonP604X/

P603X.Inthiscase,select[OFF].

NOTE:

• [OFF]isselectedatthetimeofshipmentofP604X/P603X.

• [ON]isselectedatthetimeofshipmentofP554U/P474U/P554W/P474W.

Enabling the deinterlace [DEINTERLACE]

Turnsonoroffthedeinterlacefunctionforatelecinesignal.

OFF �� Select this option if there is any jitter or artifacts in video�

ON ��Default standard setting�

NOTE:ThisfeatureisnotavailableforHDTV(progressive)andcomputersignals.

Setting HDMI1, HDMI2, and HDBaseT [HDMI SETTINGS]

(HDBaseTisnotsupportedbyP603X)

MakethesettingsforeachvideolevelwhenconnectingHDMI1equipmentsuchasaDVDplayerandHDBaseTterminal.

VIDEO LEVEL ��Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NORMAL] to

disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image contrast and

increase detail in the dark areas�

Setting Audio [AUDIO SELECT]

MakethesettingsforeachaudiolevelwhenconnectingHDMIequipmentandHDBaseTport.Selectbetweeneach

equipmentandcomputer.

HDMI1, HDMI2

�� Select [HDMI1] or [HDMI2] to switch the HDMI1 IN or HDMI 2 IN digital audio signal or select [COMPUTER] to switch

the COMPUTER input audio signal�

HDBaseT �� Select [HDBaseT] or [COMPUTER] to switch the source connected to the network�

(not supported by P603X)