User's Manual

078-5. MODEL NAME REQUEST
**********************************************************************
Function:
This command acquires the model name of the projector.
Command:
00H 85H 00H 00H 01H 04H 8AH
Response: At the time of a success
20H 85H 01H xxH 20H DATA01 .. DATA32 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 32 Model name (NULL termination character string)
Response: At the time of a failure
A0H 85H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
======================================================================
6. Table of Response Error Codes
DATA01 DATA02
00H 00H Unknown command
00H 01H
01H 00H Unvalid values specified.
01H 01H
01H 02H Selected language is not available.
02H 00H Available memory reservation error
02H 02H Operating memory
02H 03H Setting not possible
02H 04H On Forced on-screen mute mode
02H 06H
02H 07H -No signal-
02H 08H
02H 09H No PC card is inserted
02H 0AH Memory operation failed
02H 0CH Displaying the Entry List
02H 0DH Power Off inhibited
02H 0EH Execution error
02H 0FH No operation authority
03H 00H Specified gain number is wrong
03H 01H Selected gain is not available.
03H 02H Adjustment failed
Error types
Error
descriptio
Error contents
The current model does not support
this function.
Specified terminal is unavailable or
cannot be selected.
Displaying a signal other than PC
Viewer
Displaying a test pattern or PC Card
files screen.