User`s manual

165

7. Maintenance

To replace the ﬁlters:

Fourltersarepackagedwiththereplacementlamp.

Honeycomblter(coarsemesh):Largeandsmallsizes(attachedtotheoutsideofthelterunit)

Accordionlter(nemesh):Largeandsmallsizes(attachedtotheinsideofthelterunit)

NOTE:

• Replaceallfourltersatthesametime.

• Beforereplacingthelters,wipeoffdustanddirtfromtheprojectorcabinet.

• Theprojectorisprecisionequipment.Keepoutdustanddirtduringlterreplacement.

• Donotwashthelterswithsoapandwater.Soapandwaterwilldamagetheltermembrane.

• Putltersintoplace.Incorrectattachmentofaltermaycausedustanddirttogetintotheinsideoftheprojector.

Beforereplacingthelters,replacethelamp.(→page159)

1. Push up the buttons on the left and right to release the ﬁlter unit and pull it out.

2. Remove the ﬁlter unit by pulling out the tab.

3. Remove the four ﬁlters.

(1) Turn the ﬁlter unit over and pull out the two soft accordion ﬁlters (large and small).

Filter cover

Filter unit