User`s manual

9
1. Introduction
Remote Control Precautions
• Handletheremotecontrolcarefully.
• Iftheremotecontrolgetswet,wipeitdryimmediately.
• Avoidexcessiveheatandhumidity.
• Donotshort,heat,ortakeapartbatteries.
• Donotthrowbatteriesintore.
• Ifyouwillnotbeusingtheremotecontrolforalongtime,removethebatteries.
• Ensurethatyouhavethebatteries’polarity(+/−)alignedcorrectly.
• Donotusenewandoldbatteriestogether,orusedifferenttypesofbatteriestogether.
• Disposeofusedbatteriesaccordingtoyourlocalregulations.
Operating Range for Wireless Remote Control
• Theinfraredsignaloperatesbyline-of-sightuptoadistanceofabout22feet/7mandwithina60-degreeangleof
theremotesensorontheprojectorcabinet.
• Theprojectorwillnotrespondifthereareobjectsbetweentheremotecontrolandthesensor,orifstronglightfalls
onthesensor.Weakbatterieswillalsopreventtheremotecontrolfromproperlyoperatingtheprojector.
Battery Installation
40 m/131.2 feet
40 m/131.2 feet
Remote control
Remote sensor on projector cabinet
1
Pressthecatchandremove
thebatterycover.
2
Install new ones (AA). Ensure
thatyouhavethebatteries’polar-
ity(+/−)alignedcorrectly.
3
Slipthecoverbackoverthebatteriesuntilit
snapsintoplace.
NOTE:Donotmixdifferenttypes of batteriesor
newandoldbatteries.
1
2
1
2
40 m/131.2 feet
40 m/131.2 feet
20 m/65.6 feet
20 m/65.6 feet
20 m/65.6 feet
20 m/65.6 feet
15 m/49.2 feet
15 m/49.2 feet
15 m/49.2 feet
15 m/49.2 feet