User's Manual

201
9. Appendix
 Troubleshooting
Thissectionhelpsyouresolveproblemsyoumayencounterwhilesettinguporusingtheprojector.
Indicator Messages
Power Indicator
Indicatordisplay Projectorstatus Procedure
Off Powerisoff. –
Flashing Blue(shortashes) Preparingtoturnpoweron Waitawhile.
Blue(longashes) Offtimer(enabled)
Programtimer(offtimeenabled)
–
Orange(short
ashes)
Projectorcooling Waitawhile.
Orange(longashes) Programtimer(ontimeenabled)
Lit Blue Poweron –
Red Standbymode(NORMAL) –
Orange Standbymode(NETWORKSTANDBY) –
Status Indicator
Indicatordisplay Projectorstatus Procedure
Off Noproblem,or
standbymode
(POWER-SAVINGor
NETWORKSTAND-
BY)
–
Flashing Red(cycles
of1)
Coverproblem
Thelampcoverisnotproperlymounted.Mountitproperly.(→
Page161)
Red(cycles
of4)
Fanproblem Thecoolingfanhasstoppedturning.ContactanNECprojector
customersupportcenterforrepairs.
Red(cycles
of9)
Iriserror Theirisisnotoperatingproperly. Contact an NEC projector
customersupportcenterforrepairs.
Flashing Orange Networkconict It isnotpossibletoconnect the projector’sbuilt-inLANand
wirelessLANsimultaneouslytothesamenetwork.Toconnect
theprojector’sbuilt-inLANandwirelessLANsimultaneously,
connectthemtodifferentnetworks.
Lit Green Standbymode
(NORMAL)
–
Orange Buttonhasbeen
pressedwhile
projectorisinkeylock
mode
Theprojector’skeysarelocked.Thesettingmustbecanceled
tooperatetheprojector.(→Page106)
Projector’sIDnumber
andremotecontrol’s
IDnumberdonot
match
CheckthecontrolIDs.(→Pages106and107)