User's Manual

053. LENS CONTROL
**********************************************************************
Function:
This command controls the lens. (Time specification)
Command:
02H 18H 00H 00H 02H DATA01 DATA02 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Target
00H : Zoom
01H : Focus
DATA02 Contents
00H : Stops
01H : Drives for 1 second in the direction of plus
02H : Drives for 0.5 second in the direction of plus
03H : Drives for 0.25 second in the direction of plus
7FH : Drives in the direction of plus
81H : Drives in the direction of minus
FDH : Drives for 0.25 second in the direction of minus
FEH : Drives for 0.5 second in the direction of minus
FFH : Drives for 1 second in the direction of minus
Response: At the time of a success
22H 18H 01H xxH 01H DATA01 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Results
00H : Normal
01H : Error
Response: At the time of a failure
A2H 18H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Supplement:
While the lens is being driven, the same command can be issued for
control purposes without causing a stop.
053-1. LENS CONTROL REQUEST
**********************************************************************
Function:
This command acquires the information on the lens control.
Command:
02H 1CH 00H 00H 02H DATA01 DATA02 CKS
(*3)