User's Manual

-------------------------------------------------------------------
DATA01 same values as DATA01 of the command
DATA02 same values as DATA02 of the command
Response: At the time of a failure
A2H 1DH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
(!)
If specifying •gStop•h, Setting mode and adjustment values are not
referenced
053-3. LENS MEMORY CUSTOM SET
**********************************************************************
Function:
This command executes the "Use Custom Point" or "Set Custom Point".
Command:
02H 1EH 00H 00H 01H DATA01 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Target
00H : Use Custom Point
01H : Set Custom Point
Response: At the time of a success
22H 1EH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 same values as DATA01 of the command
DATA02 Results
00H : Normal
01H : Error
Response: At the time of a failure
A2H 1EH 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
053-4. LENS MEMORY REFERENCE SET
**********************************************************************
Function:
This command executes the "Use Reference Point" or "Set Reference
Point".
Command:
02H 1FH 00H 00H 01H DATA01 CKS
(*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Target
00H : Use Reference Point
01H : Set Reference Point
02H : Return to Factory Default( Reset )