User's Manual

23H B1H ID *0H 02H DATA01 DATA02 CKS
Data Portion Contents
-----------------------------------------------------------------
DATA01 Setting Items
( Same as DATA01 of the transmit data )
DATA02 Results
00H : Normal
01H : Error
Response (NAK):
A3H B1H ID *0H 02H DATA01 DATA02 CKS
Data Portion Contents
---------------------------------------------
DATA01: Error types
DATA02: Error description
See "NAK" of "6-2. Data portion of response".
098-198. PIP/SIDE BY SIDE SET
**********************************************************************
Function:
This command sets the PIP/SIDE BY SIDE of projector.
Command:
03H B1H 00H 00H 03H DATA01 DATA02 DATA03 CKS
Data Portion Contents
-------------------------------------------------------------------
DATA01 C5H fixed
DATA02 Update target
00H : MODE
01H : POSITION
02H : SOURCE
DATA03 Setting Value
if DATA02 is MODE(00H)
00H : PIP
01H : SIDE BY SIDE
if DATA02 is POSITION(01H)
00H : TOP-LEFT
01H : TOP-RIGHT
02H : BOTTOM-LEFT
03H : BOTTOM-RIGHT
if DATA02 is SOURCE(02H)
00H : OFF
01H : VIDEO
02H : S-VIDEO
Response: At the time of a success
23H B1H 01H xxH 03H DATA01 DATA02 DATA03 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 00H fixed
DATA02 Update target
( Same as DATA02 of the transmit data )
DATA03 Results