User`s manual

114

5. Using On-Screen Menu

[POWER OPTIONS]

SelectingPower-savingin[STANDBYMODE]

Settingthepowerconsumptioninthestandbymode.

NORMAL �� In the standby mode, the power consumption of the projector is 0�5 W�

In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off�

• Whensetto[NORMAL],thefollowingterminalsandfunctionswillbedisabled.HDMIOUTterminals,

Ethernet/HDBaseT port, LAN function, mail notiﬁcation function

NETWORK STANDBY

�� Compared to [NORMAL], the power consumption in the standby mode is higher but power can be supplied

to the projector using a wired LAN�

In the standby mode, the power indicator will light up in orange while the status indicator will be turned off�

Important:

• When[NETWORKSTANDBY]isselected,[AUTOPOWEROFF]willturngreyincolorandbedisabledand[0:15]willbeselected

automatically.

• Inthefollowingconditions,the[STANDBYMODE]settingwillbedisabledandtheprojectorwillgointothesleepmode.

* Sleepmodereferstothemodewherebythefunctionalrestrictionsduetothe[STANDBYMODE]settingareremoved.

• When[ENABLE]isselectedunder[NETWORKSERVICE]→[AMXBEACON]

• When[HDBaseT]isselectedunder[CONTROL]→[REMOTESENSOR]

• WhenasignalisbeingreceivedfromaHDBaseTtransmissiondevice

• When[NORMAL]isselected,the[AUTOPOWERONSELECT]displayturnsgreyincolorandisdisabled,and[OFF]isautomati-

cally selected.

NOTE:

• WhenconnectingtoaHDBaseTtransmissiondevicesoldcommercially,ifthetransmissiondeviceissettotransmitremotecontrol

signals, the power consumption of the projector in the standby mode will increase.

TIP:

• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

• ThepowerconsumptioninthestandbymodewillnotbeincludedincalculatingCO

emission reduction.

EnablingDirectPowerOn[DIRECTPOWERON]

Turnstheprojectoronautomaticallywhenthepowercordisinsertedintoanactivepoweroutlet.Thiseliminatesthe

needtoalwaysusethePOWERbuttonontheremotecontrolorprojectorcabinet.