User`s manual

124
6. Installation and Connections
Removing the lens
Preparation:
Returnthelenspositiontothehomeposition.(→page19)
Afterthelensshifthasmoved,refertothewarningonpage19andturnoffthepower.
1. Remove the lens hood.
 RefertoStep1under“Mountingthelens”.
• Ifthelensunitislockedpleaseseepage122andfollowthe
instructionsunderUsingtheLockFunctiontounlockit.
2. Turnthelenscounterclockwisetoremoveitfromthecatch,
andslowlypullforwardtoremove.
• Afterremovingthelens,mountthelenscaps(frontandback)
includedwiththelensbeforestoringthelens.
• Toreplacethelens,seeStep3of“Mountingthelens”.
3. Mount the protective cap.
 Aligntheangeontheprotectivecaptotheleftsideofthecatch
andturnclockwiseuntilitclicksintoplace.
4. Mount the lens hood to the panel.
 RefertoStep7under“Mountingthelens”.