User`s manual

135
6. Installation and Connections
Portrait projection (vertical orientation)
Byusingasafetycover(soldseparately),theprojectorcanbemounted
verticallytodisplaycomputerimagesinportraitorientation.
Ifthesafetycoverismissing,thepowerwillnotturnon.
Allscreens,suchastheon-screenmenus,willberotatedinthecounter-
clockwisedirection.
Theprojectorisequippedwithasensortoautomaticallydetecttheinstal-
lationstate.
Precautionsduringinstallation
• Pleasedonotinstalltheprojectorinaverticalorientationontopoftheoorortableonitsown.Ifnot,thepro-
jectormayfallover,resultingininjury,damageormalfunction.
• Forverticalinstallation,installtheprojectorwiththeintakevent(safetycover)facingdownwards.Astandfor
supportingtheprojectorneedstobemadeforthispurpose.Inthiscase,thestandmustbedesignedsuchthat
thecenterofgravityoftheprojectorislocatedwellwithinthelegsofthestand.Ifnot,theprojectormayfallover
andresultininjury,damageandmalfunction.
• Donotobstructtheintakeventonthesafetycover.Theprojectormayotherwiseoverheat,causingreand
malfunction.
NOTE:
• Whenusingasafetycover,thepowerturnsononlywhentheprojectorventilationintakeisfacingdown.Iftheintakeventfaces
any other direction, the power will not turn on.
• Iftheprojectorismountedverticallywithoutasafetycover,thepowerwillnotturnon.