User`s manual

169
9. Appendix
LIGHT Indicator
Indicatordisplay Projectorstatus Procedure
Off
Thelightmoduleis
turnedoff.
–
Lit Green
Lightmodulelit –
TEMP.Indicator
Indicatordisplay Projectorstatus Procedure
Off
Noproblem
Flashing Red(cycles
of2)
Temperatureproblem Thetemperatureprotectorhasbeenactivated.Iftheroom
temperatureishigh,movetheprojectortoacoolplace.If
theproblemstillpersists,contactanNECprojectorcus-
tomersupportcenter.
Lit Orange Highsurroundingtem-
perature(ForcedECO
Mode)
The surrounding temperature is high. Lower the room
temperature.
If the temperature protector is activated
Iftheprojector’sinternaltemperaturerisesabnormally,thelightmoduleturnsoffandthetemperatureindicatorashes
(repeatedlyincyclesof2).
Itmayhappenthattheprojector’stemperatureprotectorissimultaneouslyactivatedandtheprojector’spowerturnsoff.
Ifthishappens,dothefollowing:
- Unplugthepowercordfromthepoweroutlet.
- Ifusinginaplacewherethesurroundingtemperatureishigh,movetheprojectortoadifferent,coolplace.
- Ifthereisdustintheventilationholes,clean.(→page141)
- Waitassuchabout1hourfortheprojector’sinternaltemperaturetolower.