User`s manual

2. Projecting an Image (Basic Operation)

❻ Optimizing Computer Signal Automatically

Adjusting the Image Using Auto Adjust

WhenanimagefromHDMIIN,DisplayPortIN,BNCinputterminal(analogRGB),COMPUTER1IN,orHDBaseTis

beingprojected,andtheedgeiscutoffortheimagequalityispoor,thisbuttoncanbeusedtoautomaticallyoptimize

theprojectionimageonthescreen.

PresstheAUTOADJ.buttontooptimizeacomputerimageautomatically.

This adjustmentmaybe necessary when youconnect your computer

forthersttime.

[Poorpicture] [Normalpicture]

NOTE:

Somesignalsmaytaketimetodisplayormaynotbedisplayedcorrectly.

• IftheAutoAdjustoperationcannotoptimizethecomputersignal,trytoadjust[HORIZONTAL],[VERTICAL],[CLOCK],and[PHASE]

manually.(→ page 78, 79)