User`s manual

2. Projecting an Image (Basic Operation)

NOTE:

• Donotunplugthepowercordfromtheprojectororfromthepoweroutletwhileanimageisbeingprojected.Doingsocould

deterioratetheprojector’sACINterminalorthepowerplug’scontact.ToturnofftheACpowersupplywhentheprojectoris

powered on, use the projector’s main power switch, a power strip equipped with a switch, or a breaker.

• DonotturnoffthemainpowerswitchordisconnecttheACpowersupplywithin10secondsofmakingadjustmentsorsetting

changesandclosingthemenu.Doingsocancauselossofadjustmentsandsettings.

❽ After Use

Preparation:Makesurethattheprojectoristurnedoff.

1. Unplug the power cord.

2. Disconnect any other cables.

3. Mount the lens cap on the lens.

4. Beforemovingtheprojector,screwinthetiltfeetiftheyhavebeenlengthened.