User`s manual

30
3. Convenient Features
NOTE:
• The[LIGHTMODE]canbechangedbyusingthemenu.
 Select[SETUP]→[INSTALLATION]→[LIGHTMODE]→[LIGHTMODE].
• Thereisan[ECOMESSAGE]functionfordisplayingtheLIGHTMODEsettinginuseonthescreenwhenthepoweristurnedon.
Tochangesettingsforthismessage,select[SETUP]→[MENUSETUP]→[ECOMESSAGE].(→ page 95)
• Thelightmodulehoursusedcanbecheckedin[USAGETIME].Select[INFO.]→[USAGETIME].
• Afteralapseof1minutefromwhentheprojectordisplaysablue,blackorlogoscreen,[LIGHTMODE]willautomaticallyswitch
to[ECO].
• Iftheprojectorisoverheatedin[NORMAL]mode,theremaybeacasewherethe[LIGHTMODE]automaticallychangesto[ON]
modetoprotecttheprojector.Thisiscalled“ForcedLIGHTMODE”.WhentheprojectorisintheForcedLIGHTMODE,thepicture
brightnessdecreasesslightlyandtheTEMP.indicatorlightsorange.AtthesametimetheThermometersymbol[ ]isdisplayed
at the bottom right of the screen.
 Whentheprojectorcomesbacktonormaltemperature,theForcedLIGHTMODEiscancelledandthe[LIGHTMODE]returnsto
[NORMAL]mode.