User's Manual

123
6. Installation and Connections
4. Withthe“TOP”orientationindicatorfacingupwards,insert
the lens into the lens mount.
 Aligntheangeontheupperportionofthelenswiththecatch
ontheleftsideofthelensmount.
NOTE:
• Insertthelenscarefullytoavoiditfromdamagebyknockingagainst
the lens mount.
5. Turn the lens clockwise until it clicks into place.
 The3angeshavenowengagedwiththe3catchesandthe
lensunithasbeenmounted.
• Tolockthelensunitsee“Usingthelockmechanism”onthe
previouspage.
6. Mountthelenshoodtothefrontpanel.
(1)Alignthelenshoodtothefrontpanel.Ifthehooddoesnot
tintothefrontpanel,moveitleftandrightuntilitisaligned
properly.
(2)Turnthelenshoodclockwiseorcounterclockwiseuntilthe
screwholesofthelenshoodarealignedwiththescrewholes
ofthefrontpanel.
 Thehooksintherearwillengagewiththefrontpanelange.
(3)Tightenthe2screwsremovedinStep1byyourngers.