Operation Manual

105
5. Using On-Screen Menu
CuttingasignalfromtheEntryList[CUT]
1. Press the  or buttontoselectasignalyouwishtodelete.
2. Press the , , , or buttontoselect[CUT]andpresstheENTERbutton.
The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bottom
of the Entry List.
NOTE:
• Thecurrentlyprojectedsignalcannotbedeleted.
• Whenthelockedsignalisselected,itwillbedisplayedingraywhichindicatesitisnotavailable.
TIP:
• DataontheclipboardcanbepassedontotheEntryList.
• DataontheclipboardwillnotbelostaftertheEntryListisclosed.
CopyingandpastingasignalfromtheEntryList[COPY]/[PASTE]
1. Press the  or buttontoselectasignalyouwishtocopy.
2. Press the , , , or buttontoselect[COPY]andpresstheENTERbutton.
The copied signal will be displayed on the clipboard at the bottom of the Entry List.
3. Press the  or buttontomovetothelist.
4. Press the  or buttontoselectasignal.
5. Press the , , , or buttontoselect[PASTE]andpresstheENTERbutton.
Data on the clipboard will be pasted to the signal.
DeletingallthesignalsfromtheEntryList[ALLDELETE]
1. Press the , , , or buttontoselect[ALLDELETE]andpresstheENTERbutton.
The confirmation message will be displayed.
2. Press the  or buttontoselect[YES]andpresstheENTERbutton.
NOTE: The locked signal cannot be deleted.