Operation Manual

171

6. Installation and Connections

1. Press the buttontosettheprojectortothestandbymode,then

turnoffthemainpowerswitch.

2. Removetheplate(portcover).

Loosen the screw security port cover.

• Thescrewisnotremovable.

3. SlowlyinsertthewirelessLANunitintotheUSB(LAN)port.

- Remove the wireless LAN unit’s cap, set the unit with the front (the

side with the indicator) facing upwards, hold the back edge and

insert the unit gently.

Next, press the wireless LAN unit in with a ﬁnger.

- The cap you have removed will be used when the wireless LAN unit

is removed, so store it in a safe place.

NOTE:IfthewirelessLANunitishardtoinsert,donotpushitinbyforce.

4. Attachtheanti-theftcapforwirelessLANunit.

Use the screw you removed at Step 2 to secure the anti-theft cap.

Plate