Operation Manual

7
1. Introduction
Terminal Panel Features
1. COMPUTER1IN/ComponentInputConnector(MiniD-Sub15Pin)(→ page 13,162,167)
2. COMPUTER2IN/ComponentInputConnector(MiniD-Sub15Pin)(→ page 162,167)
3. COMPUTER3IN/Component(R/Cr,G/Y,B/Cb,H,V)Connectors(BNC×5)(→ page 162,167)
4. HDMIINConnector(TypeA)(→ page 163,164,168)
5. DisplayPortINConnector(DisplayPort20P)(→ page 163)
6. MONITOROUT(COMP1)Connector(MiniD-Sub15Pin)(→ page 165)
7. VIDEOINConnector(BNC)(→ page 166)
8. S-VIDEOINConnector(MiniDIN4Pin)(→ page 166)
9. LANPort(RJ-45)(→ page 169)
10.USBPort(TypeA)(→ page 75)
11.PCCONTROLPort(D-Sub9Pin)(→ page 232)
 UsethisporttoconnectaPCorcontrolsystem.Thisenablesyoutocontroltheprojectorusingserialcommunica-
tionprotocol.Ifyouarewritingyourownprogram,typicalPCcontrolcodesareonpage232.
12. REMOTE Connector (Stereo Mini)
 UsethisconnectorforwiredremotecontroloftheprojectorusingtheNECoptionalremotecontrol.
 Connecttheprojectorandoptionalremotecontrolusingacommerciallyavailablewiredremotecontrolcable.
13. USB (LAN) Port (for optional Wireless LAN Unit) (→ page 170)
14.OptionalSlot(SLOT)(→ page 218)
9 4 5 3 810 2 1 7
1311 12 14 6