Operation Manual

20
2. Projecting an Image (Basic Operation)
Selecting a Source
Selecting the computer or video source
NOTE:Turnonthecomputerorvideosourceequipmentconnectedtotheprojector.
DetectingtheSignalAutomatically
PresstheSOURCEbuttononce.Theprojectorwillsearchfortheavailable
inputsourceanddisplayit.Theinputsourcewillchangeasfollows:
COMPUTER1COMPUTER2COMPUTER3HDMIDisplayPort
VIDEOS-VIDEOVIEWERSLOTCOMPUTER1 ...
• WiththeSOURCEscreendisplayed,youcanpresstheSOURCE
buttonafewtimestoselecttheinputsource.
TIP:Ifnoinputsignalispresent,theinputwillbeskipped.
Using the Remote Control
PressanyoneoftheCOMPUTER1,COMPUTER2,COMPUTER3,HDMI,
DisplayPort,VIDEO,S-VIDEO,VIEWER,orNETWORKbuttons.
Selecting Default Source
Youcansetasourceasthedefaultsourcesothatitwillbedisplayed
eachtimetheprojectoristurnedon.
1. PresstheMENUbutton.
The menu will be displayed.
2. Press the buttontwicetoselect[SETUP]andpressthebut-
tonortheENTERbuttontoselect[BASIC].
3.
Press the
buttonvetimestoselect[OPTIONS(2)].
4. Press the button ve times to select [DEFAULT SOURCE
SELECT]andpresstheENTERbutton.
The [DEFAULT SOURCE SELECT] screen will be displayed.
( page 129)
5. Selectasourceasthedefaultsource,andpresstheENTERbut-
ton.
6. PresstheEXITbuttonafewtimestoclosethemenu.
7. Restart the projector.
The source you selected in step 5 will be projected.
NOTE:Evenwhen[AUTO]isturnedon,the[NETWORK]willnotbeautomatically
selected.Tosetyournetworkasthedefaultsource,select[NETWORK].
TIP:
• WhentheprojectorisinStandbymode, applying acomputersignalfroma
computerconnectedtotheCOMPUTER1/3INinputwillpowerontheprojector
andsimultaneouslyprojectthecomputer’simage.
([AUTOPOWERON(COMP1/3)] page 129)
• OntheWindows7keyboard,acombinationoftheWindowsandPkeysallows
you to set up external display easily and quickly.