Operation Manual

41
3. Convenient Features
ViewingTwoPictures
1. PressthePIPbuttonontheremotecontrol.
 ThePIP/PBPSOURCEscreenwillbedisplayed.
2. Use the  or buttontoselectthesourceandpresstheENTERbutton.
 ThePIPscreenorPICTUREBYPICTUREscreen will bedisplayed,dependingonwhich wasselected in the
[MODE] setting screen.
3. PressthePIPbuttonagaintoreturntothenormalscreen(singlepicture).
TIP:
• Selectinganothersourcewillreturntothenormalscreen.
• Selectingasourcenotsupportedforthemainpictureorthesubpicturewillreturntothenormalscreen.
[POSITION]
Thisoptionallowsyoutoselectthepositionofasubpictureinthemainpicture.
NOTE:
• Thedefaultsettingis[BOTTOM-RIGHT].
Usetheorbuttontoselectthesubpicture’spositionandpresstheENTERbutton.
Theoptionsare:TOP-LEFT,TOP-RIGHT,BOTTOM-LEFT,andBOTTOM-RIGHT.
Thefollowingadjustmentsandsettingsareavailableforthemainpictureonly.
-Adjustingpicture
-Magnifyingapicture
Thefollowingoperationsareavailableforboththemainandsubpictures.
-Picturemute
-Freezingamovingpicture