User's Manual

Adjusting the focus
1. Focus on the projected image around the optical axis. (Powered focus)
The drawing below shows an example when the projected image is shifted upward. In this case the optical axis is at the bottom
edge of the projected image.
Adjusting with buttons on the cabinet
Use the FOCUS (+) or (-) button on the projector cabinet.
Adjusting with the remote control
Hold the CTL button and press the VOL/FOCUS +/− button.
Optical axis
* With the lens shift in the center position the optical axis is at the center of the image. In this case, adjust the focus
at the center of the projected image.