Portable Projector V300X/V260X/V230X/ V260/V230/V300W/V260W User’s Manual The V230X, V230 and V260W are not distributed in North America. Model No.
nd edition, February 2012 • DLP and BrilliantColor are trademarks of Texas Instruments. • IBM is a trademark or registered trademark of International Business Machines Corporation. • Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Information RF Interference (for USA only) WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc. in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Important Information Place the projector in a horizontal position The tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way other than the desktop and ceiling mount, otherwise lamp life could decrease dramatically. 10˚ Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10cm) of space between your projector and a wall.
Important Information - If the projector does not operate normally when you follow the instructions described in this user's manual. - If the projector has been dropped or the cabinet has been damaged. - If the projector exhibits a distinct change in performance, indicating a need for service. • Disconnect the power cord and any other cables before carrying the projector. • Turn off the projector and unplug the power cord before cleaning the cabinet or replacing the lamp.
Important Information CAUTION: • DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off and then disconnect the power cord. Allow at least one hour for the lamp to cool before handling. • When removing the lamp from a ceiling-mounted projector, make sure that no one is under the projector. Glass fragments could fall if the lamp has been burned out. Note for US Residents The lamp in this product contains mercury.
Table of Contents Important Information. ...........................................................................................i 1. Introduction........................................................................................................... 1 1 What’s in the Box?.......................................................................................................... 1 Introduction to the Projector...........................................................................................
Table of Contents Turning Up or Down Volume......................................................................................... 28 7 Turning off the Projector............................................................................................... 29 After Use...................................................................................................................... 30 4. Convenient Features. ....................................................................................
1. Introduction 1 What’s in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector.
1. Introduction Introduction to the Projector This section introduces you to your new projector and describes the features and controls. Congratulations on Your Purchase of the Projector This DLP® projector is one of the very best projectors available today. The projector enables you to project precise images up to 300 inches (measured diagonally) from your PC or Macintosh computer (desktop or notebook), VCR, DVD player or document camera.
1. Introduction • AUTO POWER ON and AUTO POWER OFF features The DIRECT POWER ON, AUTO POWER ON(COMP.), AUTO POWER OFF, and OFF TIMER features eliminate the need to always use the POWER button on the remote control or projector cabinet. • Preventing unauthorized use of the projector Enhanced smart security settings for keyword protection, cabinet control panel lock, security slot, chain opening to help prevent unauthorized access, adjustments and theft deterrence.
1. Introduction Part Names of the Projector Front/Top Zoom Lever (→ page 25) Controls (→ page 5) Focus Ring (→ page 25) Remote Sensor (→ page 8) Ventilation (outlet) Heated air is exhausted from here. Ventilation (inlet) Lens Built-in Security Slot ( Adjustable Tilt Foot Lever (→ page 24) Adjustable Tilt Foot (→ page 24) * Lens Cap )* Security chain opening Attach an anti-theft device. The security chain opening accepts security wires or chains up to 0.18 inch/4.6 mm in diameter.
1. Introduction Top Features 7 8 9 10 5 6 1 2 3 4 6. SOURCE Button (→ page 22) 1. POWER Button (ON / STAND BY) ( ) (→ page 20, 29) 7. MENU Button (→ page 52) 2. POWER Indicator (→ page 19, 20, 29, 84) 3. STATUS Indicator (→ page 84) 8. △▽◁▷ / Keystone △▽ / Volume ◁▷ Buttons (→ page 26, 28, 31) 4. LAMP Indicator (→ page 81, 84) 9. ENTER Button 5. AUTO ADJ. Button (→ page 28) 10.
1. Introduction Terminal Panel Features V300X/V260X/V300W/V260W 9 1 3 4 5 2 7 1. COMPUTER 1 IN/ Component Input Connector (Mini D-Sub 15 Pin) (→ page 13, 14, 15) AUDIO IN Mini Jack (Stereo Mini) (→ page 13, 14, 15) 8 6 4. PC CONTROL Port (D-Sub 9 Pin) (→ page 94) Use this port to connect a PC or control system. This enables you to control the projector using serial communication protocol. If you are writing your own program, typical PC control codes are on page 94. 2.
1. Introduction Part Names of the Remote Control 1 2 4 8 9 11 14 17 18 21 22 23 26 32 3 7 5 6 10 15 13 12 16 19 20 25 27 24 28 29 10. HDMI Button (→ page 22) 11. VIEWER Button (not available on this series of projectors) 12. NETWORK Button (not available on this series of projectors) 13. USB DISPLAY Button (not available on this series of projectors) 14. ID SET Button (→ page 69) 15. Numeric Keypad Button/CLEAR Button (→ page 69) 16. FREEZE Button (→ page 31) 17. AV-MUTE Button (→ page 31) 18.
1. Introduction Battery Installation 1 Press firmly and slide the battery cover off. 2 Install new batteries (AAA). Ensure that you have the batteries’ polarity (+/−) aligned correctly. 3 Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries. EN OP EN OP Remote Control Precautions • • • • • • • • Handle the remote control carefully. If the remote control gets wet, wipe it dry immediately.
2. Installation and Connections This section describes how to set up your projector and how to connect video and audio sources. Your projector is simple to set up and use. But before you get started, you must first: 1 Set up a screen and the projector. Connect your computer or video equipment to the projector. See pages 13, 14, 15, 16, 17, 18. Connect the supplied power cord. See page 19. NOTE: Ensure that the power cord and any other cables are disconnected before moving the projector.
2. Installation and Connections Selecting a Location [V300W/V260W] The further your projector is from the screen or wall, the larger the image. The minimum size the image can be is 30" (0.76 m) measured diagonally when the projector is roughly 41 inches (1.0 m) from the wall or screen. The largest the image can be is 300" (7.6 m) when the projector is about 413 inches (10.5 m) from the wall or screen. Use the chart below as a rough guide. Screen Size (Unit: cm/inch) 646.2(W) X 403.
2. Installation and Connections Throw Distance and Screen Size The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of installation. Distance Chart C Screen center B Screen bottom D 2.
2. Installation and Connections Reflecting the Image WARNING * Installing your projector on the ceiling must be done by a qualified technician. Contact your NEC dealer for more information. * Do not attempt to install the projector yourself. • Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged. • Do not use the projector where temperatures vary greatly.
2. Installation and Connections Making Connections Connecting Your PC or Macintosh Computer NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
2. Installation and Connections Connecting an External Monitor V300X/V260X/V300W/V260W MONITOR OUT (COMP 1) [V230X/V260/V230] MONITOR OUT (COMP) Computer cable (VGA) (supplied) Computer cable (VGA) (not supplied) You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. NOTE: Daisy chain connection is not possible.
2. Installation and Connections Connecting Your DVD Player with Component Output Use audio equipment for stereo sound. The projector's built-in speaker is monaural.
2. Installation and Connections Connecting Your VCR Use audio equipment for stereo sound. The projector's built-in speaker is monaural. V230X/V260/V230 V300X/V260X/V300W/V260W AUDIO IN AUDIO IN S-VIDEO IN VIDEO IN S-Video cable (not supplied) Stereo mini plug - to - RCA audio cable (not supplied) Video cable (not supplied) Audio equipment VCR Audio cable (not supplied) NOTE: Refer to your VCR owner's manual for more information about your equipment's video output requirements.
2. Installation and Connections Connecting HDMI Input (V300X/V260X/V300W/V260W only) You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the HDMI IN connector of your projector. NOTE: The HDMI IN connector supports Plug & Play (DDC2B). HDMI IN HDMI cable (not supplied) Use High Speed HDMI® Cable.
2. Installation and Connections Connecting to a Network (V300X/V260X/V300W/V260W only) The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable. Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings for the projector over a LAN. To use a LAN connection, you are required to assign an IP address to the projector on the [PROJECTOR NETWORK SETTINGS] screen of the web browser on your computer. For setting, see page 45, 46, 47.
2. Installation and Connections Connecting the Supplied Power Cord Connect the supplied power cord to the projector. First connect the supplied power cord's three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cord in the wall outlet. The projector will go into standby mode. When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green when [NORMAL] is selected for [STANDBY MODE].
3. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. Turning on the Projector 1. Remove the lens cap • Do not remove the lens cap by pulling on the string. Doing so can cause mechanical damage to the part around the lens. 2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. The POWER indicator will turn to green and the projector will become ready to use.
3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 27 menu languages. To select a menu language, follow these steps: 1. Use the , , or button to select one of the 27 languages from the menu. 2. Press the ENTER button to execute the selection. After this has been done, you can proceed to the menu operation.
3. Projecting an Image (Basic Operation) Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Selecting from Source List Press and quickly release the SOURCE button on the projector cabinet to display the Source list. Each time the SOURCE button is pressed, the input source will change as follows: “COMPUTER”, “VIDEO”, “S-VIDEO”. To display the selected source, press the ENTER button or allow 2 seconds to elapse.
3. Projecting an Image (Basic Operation) Adjusting the Picture Size and Position Use the adjustable tilt foot, the zoom lever or the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity.
3. Projecting an Image (Basic Operation) Adjust the Tilt Foot 1. Lift the front edge of the projector. CAUTION: Do not try to touch the ventilation outlet during Tilt Foot adjustment as it can become heated while the projector is turned on and after it is turned off. 2. Push up and hold the Adjustable Tilt Foot Lever on the front of the projector to extend the adjustable tilt foot. 3. Lower the front of the projector to the desired height. 4.
3. Projecting an Image (Basic Operation) Zoom Use the ZOOM lever to adjust the image size on the screen. Zoom Lever Focus Use the FOCUS ring to obtain the best focus.
3. Projecting an Image (Basic Operation) Correcting Keystone Distortion Correcting Keystone Distortion If the screen is tilted vertically, keystone distortion becomes large. Proceed with the following steps to correct keystone distortion NOTE: • The Keystone correction can cause an image to be slightly blurred because the correction is made electronically. • The Keystone correction range can be made narrower, depending on a signal or its aspect ratio selection. Adjusting with buttons on the cabinet 1.
3. Projecting an Image (Basic Operation) Adjusting with the remote control 1. Press the KEYSTONE button. The Keystone bar will be displayed. 2. Use the or button to correct the keystone distortion. Adjust so that the right and left sides are parallel. 3. Press the ENTER button. NOTE: • The Keystone correction can cause an image to be slightly blurred because the correction is made electronically. • The maximum range of vertical keystone correction is +/−40 degrees.
3. Projecting an Image (Basic Operation) Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust Optimizing a computer image automatically. Press the AUTO ADJ. button to optimize a computer image automatically. This adjustment may be necessary when you connect your computer for the first time. [Poor picture] [Normal picture] NOTE: Some signals may take time to display or may not be displayed correctly. • The Auto Adjust function will work for computer (RGB) signal only.
3. Projecting an Image (Basic Operation) 7 Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the POWER OFF button on the remote control. The [POWER OFF / ARE YOU SURE? /CARBON SAVINGS- SESSION X.XXX[g-CO2]] message will appear. 2. Secondly, press the ENTER button or press the (POWER) or the POWER OFF button again. The lamp will turn off and the projector will go into standby mode.
3. Projecting an Image (Basic Operation) After Use Preparation: Make sure that the projector is turned off. 1. Disconnect any other cables. 2. Retract adjustable tilt foot if extended. 3. Cover the lens with the lens cap.
4. Convenient Features 1 Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. NOTE: Even though the image is turned off, the menu still remains on the screen. 2 Freezing a Picture Press the FREEZE button to freeze a picture. Press again to resume motion. NOTE: The image is frozen but the original video is still playing back. Enlarging a Picture You can enlarge the picture up to four times.
4. Convenient Features Changing Eco Mode This feature enables you to select two brightness modes of the lamp: OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE]. [ECO MODE] Description Status of LAMP indicator [OFF] This is the default setting (100% Brightness). Off LAMP STATUS [ON] Select this mode to increase the lamp life (approx. 90% Brightness on V260X/V230X/V260/V230/ V260W and approx.75% Brightness on V300X/ V300W.) To turn on the [ECO MODE], do the following: 1.
4. Convenient Features 5 Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO MODE] is set to [ON]. This feature is called [CARBON METER]. There are two messages: [TOTAL CARBON SAVINGS/TOTAL COST SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON SAVINGS/TOTAL COST SAVINGS] message shows the total amount of CO2 emission reduction and the electricity cost savings from the time of shipment up to now.
4. Convenient Features 6 Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the projector cannot project an image. • The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu. To enable the Security function: 1. Press the MENU button.
4. Convenient Features 7. Type in the same combination of buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press and hold the POWER button. The projector will be turned on and display a message to the effect that the projector is locked. 2. Press the MENU button. 3. Type in the correct keyword and press the ENTER button.
4. Convenient Features To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The KEYWORD CONFIRMATION screen will be displayed. 4. Type in your keyword and press the ENTER button. When the correct keyword is entered, the SECURITY function will be disabled. NOTE: If you forget your keyword, contact your dealer.
4. Convenient Features 7 Using the Optional Remote Mouse Receiver (NP01MR) The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connecting the remote mouse receiver to your computer If you wish to use the remote mouse function, connect the mouse receiver and computer. The mouse receiver can be connected directly to the computer’s USB port (type A).
4. Convenient Features Operating your computer’s mouse from the remote control You can operate your computer’s mouse from the remote control. PAGE / Button: scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer. Buttons: moves the mouse cursor on your computer. MOUSE L-CLICK Button: works as the mouse left button. MOUSE R-CLICK Button: works as the mouse right button.
4. Convenient Features 8 Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool) Using the utility software “Virtual Remote Tool” included on the companion NEC Projector CD-ROM, Virtual Remote screen (or toolbar) can be displayed on your computer screen. This will help you perform operations such as projector’s power on or off and signal selection via the computer cable (VGA), serial cable, or LAN connection.
4. Convenient Features Step 1: Install Virtual Remote Tool on the computer Supported OS Virtual Remote Tool will run on the following operating systems. Windows 7 Home Basic, Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 7 Enterprise, Windows Vista Home Basic *1, Windows Vista Home Premium *1, Windows Vista Business *1, Windows Vista Enterprise *1, Windows Vista Ultimate *1 Windows XP Home Edition *2, Windows XP Professional *2 *1: Supports 32-bit version.
4. Convenient Features 3 Click “Next”. “END USER LICENSE AGREEMENT” screen will be displayed. Read “END USER LICENSE AGREEMENT” carefully. 4 If you agree, click “I accept the terms in the license agreement” and then click “Next”. • Follow the instructions on the installer screens to complete the installation.
4. Convenient Features TIP: Uninstalling Virtual Remote Tool Preparation: Exit Virtual Remote Tool before uninstalling. To uninstall Virtual Remote Tool, the Windows user account must have “Administrator” privilege (Windows 7 and Windows Vista) or “Computer Administrator” privilege (Windows XP). • For Windows 7/Windows Vista 1 Click “Start” and then “Control Panel”. The Control Panel window will be displayed.
4. Convenient Features Step 3: Start Virtual Remote Tool Start using the shortcut icon • Double-click the shortcut icon on the Windows Desktop. Start from the Start menu • Click [Start] → [All Programs] or [Programs] → [NEC Projector User Supportware] → [Virtual Remote Tool] → [Virtual Remote Tool]. When Virtual Remote Tool starts for the first time, “Easy Setup” window will be displayed.
4. Convenient Features Exiting Virtual Remote Tool 1 Click the Virtual Remote Tool icon on the Taskbar. The pop-up menu will be displayed. 2 Click “Exit”. The Virtual Remote Tool will be closed. Viewing the help file of Virtual Remote Tool • Displaying the help file using the taskbar 1 Click the Virtual Remote Tool icon on the taskbar when Virtual Remote Tool is running. The pop-up menu will be displayed. 2. Click “Help”. The Help screen will be displayed.
4. Convenient Features 9 Network Setting by Using an HTTP Browser (V300X/V260X/ V300W/V260W only) Overview Connecting the projector to a network allows the Alert Mail setting (→ page 47) and the projector control from a computer via the network. To perform the projector control, you must have an exclusive application installed on your computer. The IP address and subnet mask of the projector can be set on the Network Setting screen of the web browser by using an HTTP server function.
4. Convenient Features Network Settings http:// /index.html DHCP ����������������������������������Enabling this option automatically assigns an IP address to the projector from your DHCP server. Disabling this option allows you to register the IP address or subnet mask number obtained from your network administrator. TIP: You can check the IP address in the menu when [ENABLE] is selected for [DHCP]. To do so, from the menu, select [INFO.
4. Convenient Features Alert Mail Setting http:///lanconfig.html This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector. HOST NAME ���������������������������� Type in the hostname of the network connected to the projector. Up to 60 alphanumeric characters can be used.
4. Convenient Features J Viewing 3D Images The projector provides 3D images to a user wearing commercially available LCD shutter eyeglasses. CAUTION Health precautions Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your LCD shutter eyeglasses or your 3D compatible content such as DVDs, video games, computer's video files and the like.
4. Convenient Features On-screen menu for 3D images Follow the steps to display the 3D menu. 1. Press the MENU button. The [SOURCE] menu will be displayed. [V230X/V260/V230] [V300X/V260X/V300W/V260W] 2. Press the button twice. The [SETUP] menu will be displayed. 3. Press the button once, and then press the button five times. The [3D] menu will be displayed [V230X/V260/V230] [V300X/V260X/V300W/V260W] 4. Press the button to select a signal and press the ENTER button. 5.
4. Convenient Features 8. Press the button to select a compatible eyeglass method and press the ENTER button. (→ page 75) Set other 3D-related menu options such as [FORMAT] and [L/R INVERT] as necessary. 9. Press the MENU button once. The menu will disappear. Selecting input connected to a source of 3D images [COMPUTER / VIDEO / S-VIDEO] (V230X/V260/V230)/ [COMPUTER 1/COMPUTER 2/HDMI/VIDEO/S-VIDEO (V300X/V260X/V300W/V260W) This function switches the 3D mode between ON and OFF for each input.
4. Convenient Features Troubleshooting on viewing 3D images If images will not be displayed in 3D or 3D images appear as 2D, check the following table. Also refer to the user's manual accompanied with your 3D content or LCD shutter eyeglasses. Possible causes • The content you are playing back is not compatible with 3D. • • • • Solutions • Play back a content compatible with 3D. • Use the projector's menu to turn on 3D mode for the selected The 3D mode was turned off for the selected source. source.
5. Using On-Screen Menu Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, , in the bottom show available buttons for your operation. 2. Press the buttons on the remote control or the projector cabinet to display the submenu. 3.
5. Using On-Screen Menu 2 Menu Elements Tab Slide bar Solid triangle Available buttons Source Highlight Radio button ECO mode symbol High Altitude symbol Thermometer symbol Off Timer remaining time Key Lock symbol Menu windows or dialog boxes typically have the following elements: Highlight �����������������������������Indicates the selected menu or item. Solid triangle ����������������������Indicates further choices are available. A highlighted triangle indicates the item is active.
5. Using On-Screen Menu 3 List of Menu Items Some menu items are not available depending on the input source.
5. Using On-Screen Menu OPTIONS(2) STANDBY MODE DIRECT POWER ON AUTO POWER ON(COMP.) (V230X/V260/V230) AUTO POWER ON(COMP1) (V300X/V260X/V300W/V260W) AUTO POWER OFF NORMAL OFF DEFAULT SOURCE SELECT SETUP 3D COMPUTER2 (DETAIL SETTINGS) (V300X/V260X/ V300W/V260W) HDMI (DETAIL SETTINGS) (V300X/V260X/ V300W/V260W) USAGE TIME SOURCE(1) INFO.
5. Using On-Screen Menu 4 Menu Descriptions & Functions [SOURCE] [V230X/V260/V230] [V300X/V260X/V300W/V260W] COMPUTER (V230X/V260/V230) Selects the computer connected to your COMPUTER IN input connector. NOTE: • When the component input signal is connected to the COMPUTER IN connector, select [COMPUTER]. • The projector will determine if the input signal is RGB or component signal.
5. Using On-Screen Menu 5 Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are six factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set user adjustable settings to customize each gamma or color. Your settings can be stored in [PRESET 1] to [PRESET 6].
5. Using On-Screen Menu Selecting Gamma Correction Mode [GAMMA CORRECTION] Each mode is recommended for: DYNAMIC �������������� Creates a high-contrast picture. NATURAL ��������������� Natural reproduction of the picture. BLACK DETAIL ������� Emphasizes detail in dark areas of the picture. Adjusting Color Temperature [COLOR TEMPERATURE] This option allows you to select the color temperature of your choice.
5. Using On-Screen Menu [RESET] The settings and adjustments for [PICTURE] will be returned to the factory settings with the exception of the following; Preset numbers and [REFERENCE] within the [PRESET] screen. The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently selected will not be reset.
5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK ������������������� Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This adjustment may be necessary when you connect your computer for the first time.
5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not a malfunction. - Your manual adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal.
5. Using On-Screen Menu Options AUTO 4:3 16:9 15:9 16:10 WIDE ZOOM (V300X/V260X/V230X/ V260/V230) LETTER BOX (V300W/V260W) NATIVE Function The projector will automatically determine the incoming signal and display it in its aspect ratio. (→ next page) The projector may erroneously determine the aspect ratio depending on its signal. If this occurs, select the appropriate aspect ratio from the following. The image is displayed in 4:3 aspect ratio. The image is displayed in 16:9 aspect ratio.
5. Using On-Screen Menu V300W/V260W [Computer signal] Aspect ratio of incoming signal 4:3 5:4 16:9 15:9 16:10 Sample image when the appropriate aspect ratio is automatically determined [Video signal] Aspect ratio of incoming signal 4:3 Letterbox Squeeze Sample image when the aspect ratio is automatically determined NOTE: To display a letterbox signal NOTE: To display a squeezed signal properly, select [LETTERBOX]. properly, select [16:9].
5. Using On-Screen Menu 6 Menu Descriptions & Functions [SETUP] [GENERAL] Correcting Vertical Keystone Distortion Manually [KEYSTONE] You can correct vertical distortion manually. (→ page 26) TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment. Saving Vertical Keystone Correction [KEYSTONE SAVE] This option enables you to save your current keystone settings. OFF ������������������������ Does not save current keystone correction settings.
5. Using On-Screen Menu Setting Eco Mode [ECO MODE] This feature turns on or off the ECO mode. The lamp life can be extended by selecting [ON]. Selecting [ON] also decreases fan noise when compared to [OFF] mode. ECO MODE Description Status of LAMP indicator OFF This is the Default setting (100% Brightness). Off ON Select this mode to increase the lamp life (approx. 90% Brightness on V260X/V230X/ Steady Green light V260/V230/V260W and approx.75% Brightness on V300X/V300W.
5. Using On-Screen Menu [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [SOURCE DISPLAY] This option turns on or off input name display such as COMPUTER, VIDEO, S-VIDEO and No Input to be displayed on the top right of the screen. When [ON] is selected, the following will be displayed: - An input name display such as [COMPUTER] will be shown immediately after source selection.
5. Using On-Screen Menu Selecting Menu Display Time [DISPLAY TIME] This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the factory preset. Selecting a Color or Logo for Background [BACKGROUND] Use this feature to display a blue/black screen or logo when no signal is available. The default background is [LOGO]. TIP: The logo can be changed.
5. Using On-Screen Menu [INSTALLATION] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR DESKTOP REAR CEILING FRONT Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • This CONTROL PANEL LOCK does not affect the remote control functions.
5. Using On-Screen Menu Selecting Communication Speed [COMMUNICATION SPEED] This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps. The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs). NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.
5. Using On-Screen Menu [OPTIONS(1)] Selecting Fan Mode [FAN MODE] This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode. AUTO ��������������������� The built-in fans automatically run at a variable speed according to the internal temperature. HIGH ���������������������� The built-in fans run at high speed. HIGH ALTITUDE ����� The built-in fans run at a high speed.
5. Using On-Screen Menu Enabling or Disabling WXGA Mode [WXGA MODE] Selecting [ON] will give priority to a WXGA (1280 x 768) signal in recognizing an input signal. When [WXGA MODE] is set to [ON], an XGA (1024 x 768) signal may not be recognized on V300X/V260X/V230X/ V260/V230. In this case, select [OFF]. Setting HDMI [HDMI SETTINGS] (V300X/V260X/V300W/V260W) Make the settings for video level and audio level when connecting HDMI equipment such as a DVD player.
5. Using On-Screen Menu [OPTIONS(2)] Selecting Power-saving in [STANDBY MODE] The projector has two standby modes: [NORMAL] and [POWER-SAVING]. The POWER-SAVING mode is the mode that allows you to put the projector in the power-saving condition which consumes less power than the NORMAL mode. The projector is preset for NORMAL mode at the factory.
5. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.) for V230X/ V260/V230 [AUTO POWER ON(COMP1) ] for V300X/V260X/V300W/V260W] When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER IN input (COMPUTER 1 IN on V300X/V260X/V300W/V260W) will power on the projector and simultaneously project the computer’s image.
5. Using On-Screen Menu Changing currency setting and currency convert setting [CURRENCY CONVERT] Changes currency setting and currency convert setting for CARBON METER. The initial setting are as follows: US Dollar ����������������������������0.11 [$/kWh] EU Euro ������������������������������0.19 [€/kWh] Japanese Yen ����������������������20 [¥/kWh] Chinese Yuan ����������������������0.
5. Using On-Screen Menu [3D] [V300X/V260X/V300W/V260W] [V230X/V260/V230] Selecting input connected to a source of 3D images [COMPUTER / VIDEO / S-VIDEO] (V230X/V260/V230)/ [COMPUTER 1/COMPUTER 2/HDMI/VIDEO/S-VIDEO] (V300X/V260X/V300W/V260W) [3D] This function switches the 3D mode between ON and OFF for each input. ON ������������������������� Turns on the 3D mode for the selected input.
5. Using On-Screen Menu [FORMAT] Selects either two formats: frame sequential or over/undert FRAME SEQUENTIAL ����������Normal setting. (frame sequential 3D consists of a sequence of alternating frames wherein each successive frame carries the image meant for one or the other eye.) OVER/UNDER ���������������������For viewing a 3D images in under/over format. NOTE: This function will not work for VIDEO or S-VIDEO source. This option is available only when [DLP® Link] is selected for [GLASSES].
5. Using On-Screen Menu 7 Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has three pages (four pages on V300X/V260X/ V300W/V260W). The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP LIFE REMAINING] (%)* [LAMP HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2) [TOTAL COST SAVINGS] * The progress indicator shows the percentage of remaining bulb life.
5. Using On-Screen Menu [SOURCE 1] [SOURCE 2] [RESOLUTION] [HORIZONTAL FREQUENCY] [VERTICAL FREQUENCY] [SYNC TYPE] [SYNC POLARITY] [SCAN TYPE] [SIGNAL TYPE] [VIDEO TYPE] [BIT DEPTH] (V300X/V260X/V300W/V260W) [VIDEO LEVEL] (V300X/V260X/V300W/V260W) [3D SIGNAL] [WIRED LAN] (V300X/V260X/V300W/V260W only) [VERSION] [PROJECTOR NAME] [SUBNET MASK] [MAC ADDRESS] [FIRMWARE] Version [DATA] Version [IP ADDRESS] [GATEWAY] [OTHERS] [MODEL NO.
5. Using On-Screen Menu 8 Menu Descriptions & Functions [RESET] [V230X/V260/V230] [V300X/V260X/V300W/V260W] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels.
6. Maintenance This section describes the simple maintenance procedures you should follow to clean the cabinet and the lens, and replace the lamp. Cleaning the Cabinet and the Lens 1. Turn off the projector before cleaning. 2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner. Vacuum the ventilation inlet of the cabinet.
6. Maintenance Replacing the Lamp When the lamp reaches the end of its life, the LAMP indicator in the cabinet will blink red. Even though the lamp may still be working, replace the lamp to maintain the optimal projector performance. After replacing the lamp, be sure to clear the lamp hour meter. (→ page 79) CAUTION • Use the specified lamp for safety and performance. • DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot.
6. Maintenance 1. Remove the lamp cover. (1) Loosen the lamp cover screw • The lamp cover screw is not removable. (2) Push and slide the lamp cover off. 2. Remove the lamp housing. (1) Loosen the three screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condition. • The three screws are not removable. • There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock. (2) Remove the lamp housing by holding it.
6. Maintenance 3. Install a new lamp housing. (1) Insert a new lamp housing until the lamp housing is plugged into the socket. CAUTION Do not use a lamp other than the NEC replacement lamp NP18LP(V300X/V300W)/NP13LP(V260X/V230X/V260/ V230/V260W). Order this from your NEC dealer. (2) Push the top center of the lamp housing to secure it. (3) Secure it in place with the three screws. • Be sure to tighten the screws. Hold the cabinet with your hand to keep it from tilting while you tighten the screw. 4.
7. Appendix Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages Power Indicator Indicator Condition Off Blinking light Steady light Green Projector Condition Note The power cord is unplugged. – 0.5 sec On, 0.5 sec Off The projector is getting ready to turn on. Wait for a moment. 2.5 sec On, 0.5 sec Off Off Timer is enabled. – Green The projector is turned on.
7. Appendix Common Problems & Solutions (→ “Power/Status/Lamp Indicator” on page 84.) Problem Check These Items Does not turn on or shut down • Check that the power cord is plugged in and that the power button on the projector cabinet or the remote control is on. (→ pages 19 and 20) • Ensure that the lamp cover is installed correctly. (→ page 83) • Check to see if the projector has overheated.
7. Appendix If there is no picture, or the picture is not displayed correctly. • Power on process for the projector and the PC. Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up. NOTE: You can check the horizontal frequency of the current signal in the projector’s menu under Information.
7. Appendix Specifications This section provides technical information about projector's performance. Optical Projection System Resolution*1 Lens Lamp Light Output *2 *3 Contrast Ratio*3 (full white: full black) Image Size (Diagonal) V300X V260X V230X Single DLP® chip (0.55”, aspect 4:3) 1024 × 768 pixels (XGA) Manual zoom and focus F=2.41-2.55, f=21.8-24.
7. Appendix *4 HDMI™ (Deep Color, Lip Sync) with HDCP What is HDCP/HDCP technology? HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content Protection (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual Interface (DVI). If you are unable to view material via the HDMI input, this does not necessarily mean the projector is not functioning properly.
7. Appendix Optical Projection System Resolution*1 Lens Lamp Light Output *2 *3 Contrast Ratio*3 (full white: full black) Image Size (Diagonal) V300W Single DLP® chip (0.65”, aspect 16:10) 1280 × 800 pixels (WXGA) Manual zoom and focus F=2.50-2.67, f=21.9-24.0mm 225W AC (170W in ECO ON) 3000 lumens ECO ON: 75% V260W 180W AC (160W in ECO ON) 2600 lumens ECO ON:90% 2200:1 30–300 inches/ 0.76 –7.6 m (16:10) 39" - 394" (wide) / 43" - 432" (tele) Projection Distance (mini.-max.) 1.00 - 10.0 m (wide) / 1.
7. Appendix Mechanical Installation Orientation Dimensions Weight Environmental Considerations Regulations V300W Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear 12.2”(W) x 3.7 (H) x 9.7”(D) 310 mm (W) x 95 mm (H) x 247 mm (D) (not including protrusions) 5.5 lbs / 2.
7. Appendix Cabinet Dimensions V300X/V260X/V300W/V260W 247(9.7) V230X/V260/V230 310(12.2) Lens center 95 (3.7) 96(3.8) 68.4 (2.
7. Appendix Pin Assignments of D-Sub COMPUTER Input Connector Mini D-Sub 15 Pin Connector 6 11 12 13 14 15 7 8 9 10 1 2 3 4 5 Pin No. Signal Level Video signal : 0.
7. Appendix Compatible Input Signal List Horizontal: 15KHz to 100KHz (RGB: 24KHz or over) Vertical: 50Hz to 120Hz (Signals with higher than refresh rate 85 Hz support resolutions of 1024 x 768 or lower.
7.
7. Appendix Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently. * Print this page and the next page for your check. Frequency of occurrence always sometimes (How often?_____________________) other (__________________) Power No power (POWER indicator does not light green).
7. Appendix In the space below please describe your problem in detail. Information on application and environment where your projector is used Installation environment Projector Model number: Screen size: Serial No.
7. Appendix 8 TravelCare Guide TravelCare - a service for international travelers This product is eligible for “TravelCare”, NEC’s unique international warranty and repair service. For more information on TravelCare service, visit our website (in English only). http://www.nec-display.com/dl/en/pj_support/travel_care.html 9 TCO Certification Some models in this product family are TCO certified. All TCO certified models have the TCO mark on the marking plate (on the bottom of the product).
© NEC Display Solutions, Ltd.