Owner's Manual

2. Installation and Connections

HDMI IN

Connecting HDMI Input (VE281X/VE281/VE282X/VE282 only)

YoucanconnecttheHDMIoutputofyourDVDplayer,harddiskplayer,Blu-rayplayer,ornotebooktypePCtothe

HDMIINconnectorofyourprojector.

NOTE:TheHDMIINconnectorsupportsPlug&Play(DDC2B).

Audio cable (not supplied)

HDMI cable (not supplied)

Use High Speed HDMI

Cable.

TIP:ForusersofaudiovideoequipmentwithanHDMIconnector:

Select“Enhanced”ratherthan“Normal”ifHDMIoutputisswitchablebetween“Enhanced”and“Normal”.

This will provide improved image contrast and more detailed dark areas.

Formoreinformationonsettings,refertotheinstructionmanualoftheaudiovideoequipmenttobeconnected.

• WhenconnectingtheHDMIINconnectoroftheprojectortotheDVDplayer,theprojector’svideolevelcanbe

madesettingsinaccordancewiththeDVDplayer’svideolevel.Inthemenuselect[HDMISETTINGS]→[VIDEO

LEVEL]andmakenecessarysettings.

• IftheHDMIinputsoundcannotbeheard,inthemenuselect[HDMISETTINGS]→[AUDIOSELECT]→

[HDMI](→page58).

NOTE: HDMI signal

IftheACpowersupplyisremovedfromtheprojector(DirectPowerOfffunction)whiledisplayinganimageconnected

totheHDMIinput,theprojectormaynotdisplayanimageproperlythenexttimeitispoweredup.Shouldthishappen,

powerofftheACsupply,poweroffyourHDMIequipment(ordisconnecttheHDMIcable),andthenpoweronthe

ACsupply.