Owner's Manual

2. Installation and Connections

Connecting the Supplied Power Cord

Connectthesuppliedpowercordtotheprojector.

Firstconnectthesuppliedpowercord'sthree-pinplugtotheACINoftheprojector,andthenconnecttheotherplug

ofthesuppliedpowercordinthewalloutlet.

To wall outlet

Theprojector will go into standby

mode.Wheninstandbymode,the

POWERindicatorwilllightorange

andtheSTATUSindicatorwilllight

greenwhen[NORMAL]isselected

for[STANDBYMODE].

CAUTION:

PartsoftheprojectormaybecometemporarilyheatediftheprojectoristurnedoffwiththePOWERbuttonorif

theACpowersupplyisdisconnectedduringnormalprojectoroperation.

Usecautionwhenpickinguptheprojector.

Make sure that the prongs are fully inserted into both the

power plug and the wall outlet.