Owner's Manual

5. Using On-Screen Menu

Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]

Adjuststheimagelocationhorizontallyandvertically.

- Animagecanbedistortedduringtheadjustmentof[CLOCK]and[PHASE].Thisisnotamalfunction.

- Yourmanualadjustmentsfor[CLOCK],[PHASE],[HORIZONTAL],and[VERTICAL]willbestoredinmemory

forthecurrentsignal.Thenexttimeyouprojectthesignalwiththesameresolution,horizontalandvertical

frequency,itsadjustmentswillbecalledupandapplied.

 Todeleteadjustmentsstoredinmemory,fromthemenu,youselect[RESET]→[ALLDATA]andresetthe

adjustments.

NOTE:

• The[RESET]→[ALLDATA]clearnotonly[IMAGEOPTION].(→page 64)

Selecting Overscan Percentage [OVERSCAN]

Thisallowsyoutosettheappropriateoverscanforanincomingsignal.

AUTO �� Display an appropriately overscanned image ( factory setting)�

OFF �� Does not overscan the image�

ON �� Overscans the image�

NOTE:

• The[OVERSCAN]cannotbeselectedwhenVIDEOsignalsareused.

• The[OVERSCAN]itemisnotavailablewhen[NATIVE]isselectedfor[ASPECTRATIO].

Selecting Aspect Ratio [ASPECT RATIO]

Theterm“aspectratio”referstotheratioofwidthtoheightofaprojectedimage.

Theprojectorautomaticallydeterminestheincomingsignalanddisplaysitinitsappropriateaspectratio.

•Thistableshowstypicalresolutionsandaspectratiosthatmostcomputerssupport.

Resolution AspectRatio

VGA  640x480 4:3

SVGA  800x600 4:3

XGA  1024x768 4:3

WXGA  1280x768  15:9

WXGA

 1280x800  16:10

WXGA+

 1440x900  16:10

SXGA

 1280x1024  5:4

SXGA+

 1400x1050 4:3

UXGA  1600x1200 4:3