Owner's Manual

6. Maintenance

Replacing the Lamp

Whenthelampreachestheendofitslife,theLAMPindicatorinthecabinetwillblinkredandthemessagewillbe

displayed.Eventhoughthelampmaystillbeworking,replacethelamptomaintaintheoptimalprojectorperformance.

Toreplacethelamp,contactyourNECdealer.Thelampisnotuserreplaceableparts.

CAUTION

• Ifyoucontinuetousethelampafterthelampreachestheendofitslife,thelampbulbmayshatter,andpieces

ofglassmaybescatteredinthelampcase.Donottouchthemasthepiecesofglassmaycauseinjury.Ifthis

happens,contactyourNECdealerforlampreplacement.

*NOTE: This message will be displayed under the following conditions:

• foroneminuteaftertheprojectorhasbeenpoweredon

• whenthe (POWER)buttonontheprojectorcabinetorthePOWEROFFbuttonontheremotecontrolispressed

To turn off the message, press any button on the projector cabinet or the remote control.