Operation Manual

28
3. Projecting an Image (Basic Operation)
➐
Adjusting Volume Up & Down
Soundlevelfromthespeakerontheprojectorcanbeadjusted.
Anotherwaytoadjustvolumeistousethemenu.
Select[ADJUST]→[BASIC]→[VOLUME]fromthemenu.
NOTE:The[BEEP]soundvolumecannotbeadjusted.Toturnoffthe[BEEP]sound,fromthemenu,select[SETUP]→[OPTIONS(1)]
→[BEEP]→[OFF].
AUTO
ADJ.
ON/STAND BY
FOCUS
LAMP
STATUS
POWER
❽
Turning off the Projector
To turn off the projector:
First, press the POWER (ON/STAND BY) button on the
projector cabinet or the POWER OFF button on the re-
mote control. The “POWER OFF / ARE YOU SURE? /CAR-
BON SAVINGS- SESSION X.XXX[g-CO2]” message will
appear.
Secondly, press the ENTER button or press the POWER
(ON/STAND BY) or the POWER OFF button again.
The power indicator will glow orange.
POWER
STATUS
LAMP
POWER
STATUS
LAMP
STATUS
LAMP
POWER
Power On Fan running Standby
Steady green light Blinking
orange light
Steady green/
orange light
CAUTION:
PartsoftheprojectormaybecometemporarilyheatediftheACpowersupplyisdisconnectedeitherduringnor-
malprojectoroperationorduringcoolingfanoperation.Usecautionwhenpickinguptheprojector.
NOTE:
• TheprojectorcannotbeturnedoffwiththeON/STAND BY buttonor thePOWER OFFbuttonwhilethePOWERindicatoris
ashinggreeninacycleof0.5secondonand0.5secondoff.
• DonotdisconnecttheACpowersupplytotheprojectorfor60secondsimmediatelyafterturningitonanddisplayinganim-
age.
• Donotturnofftheprojectorusingthe“DirectPowerOff”functionwithin10secondsofmakingadjustmentorsettingchang-
esandclosingthemenu.Doingsocancauselossofadjustmentsandsettings.
＋