Specifications

DATA02 Switching number
---------------------------------------------------------
When the switching object is the "Signal list", the signal list number is specified. (0…99)
---------------------------------------------------------
When the switching object is the "Input connector", the input connector number is specified.
MT LT LT180 LT80 HT GT WT VT NP1000/3150 HT10 LT30 NP40 NP4000/4100 NP905 NP600 NP62/64 NP3250 NP610 NP2200 NP215 NP216
01HRGB1(RGB) ******** * *** * *** *****
02H RGB2 (!1) * * x * x * x * * x x x * * x x * * * x *
02H DVI(ANALOG) (!2) x x x x x x * x x x x x x x * x x x x x x
06H Video * * * * * * * * * * * * * * * * * * * * *
0BH S-Video * * * * * * * * * * * * * * * * * * * * *
10H Component x x * * * x x x * x x x * x x x * x x x x (!!)
11H Component x x * x * x x x x * x x x x x x x x x x x (!!!)
12H Component x x x x x x x * x x x x x x * x x x x x x (!!!!)
1AH DVI (*6) (!2) * x * x * x x * x x x x * x * x x x x x x (!)
1AH DVI(DIGITAL)(*6) x x x * x * * x * x x x x x x x * * * x x (!)
1AHHDMI xxxxxxxxx xxx x *xxxxxxx
1FH Viewer * * * * * * * * * x x x x * * * (!3) * x x x x (!!!!)
20H LAN * * x * x * * x * x x x x * x x * x x x x
07H RGB(Video) x x x x x * x x x x x x x x x x x x x x x
0CH RGB(S-Video) x x x x x * x x x x x x x x x x x x x x x
24HSLOT1-1 xxxxx*xx x xxx x xxx xxxxx
25HSLOT1-2 xxxxx*xx x xxx x xxx xxxxx
29HSLOT2-1 xxxxx*xx x xxx x xxx xxxxx
2AHSLOT2-2 xxxxx*xx x xxx x xxx xxxxx
* : Supported
x : Not supported
(!): The MT860/LT280 does not support a DVI connector.
(!!) HT1000
(!!!) HT410/HT510/HT1100
(!!!!) VT770 support Component and Viewer
(!1) VT470/VT470JY/VT570/VT670/VT575/VT676/VT480/VT580
(!2) VT595/VT695/VT700/NP300/NP400/NP500/NP500W/NP600/NP500WS/NP600S
(!3) NP62/NP64 only (not available on NP41/NP43/NP61
Terminal
Name
Terminal
Number
Response: At the time of a success
22H 03H 01H xxH 01H DATA01 CKS
(*1) (*2) (*3)
Data Portion Contents
-------------------------------------------------------------------
DATA01 Results
00H : Normal
FFH : Error
Response: At the time of a failure
A2H 03H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)
Command example:
* When switch to the Video connector
02H 03H 00H 00H 02H 01H 06H 0EH
020. PICTURE MUTE ON
**********************************************************************
Function:
This command blanks the picture.
Command:
02H 10H 00H 00H 00H 12H
Response: At the time of a success
22H 10H 01H xxH 00H CKS
(*1) (*2) (*3)
Response: At the time of a failure
A2H 10H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4) (*3)