Specifications

DATA01 Error types
00H : Not supported
01H : Parameter error
02H : Operation mode error
03H : Gain-related error
04H : Logo transfer error
DATA02 Error description
* When not supported
00H : Unknown command
01H : The current model does not support this function.
02H : This model is not compatible with the Switcher.
03H : This model is not compatible with the PC Viewer.
* When a parameter error occurs
00H : Unvalid values specified.
01H : Specified terminal is unavailable or cannot be selected
02H : Selected language is not available.
* When an operation mode error occurs
00H : Available memory reservation error
01H : External control working
02H : Operating memory
03H : Standby
04H : On Forced on-screen mute mode
05H : Link mode working
06H : Displaying a signal other than PC Viewer
07H : -No signal-
08H : Displaying a test pattern or PC Card Files screen.
09H : No PC card is inserted-
0AH : Memory operation failed
0BH : Switcher mode working
0CH : Displaying the Entry List
* When a gain adjustment error occurs
00H : Group number / sub category number is not correct.
01H : Selected gain is not available.
02H : Adjustment failed
* When a logo transfer error occurs
00H : Start is not requested
01H : Cannot process due to storing
02H : Exceeds the total number of blocks required
at the time of start
03H : The block number of transferred data is not consecutive.
USB connection
----------------------------------------------------------------------
This conforms to the USB1.1 standard.
Transfer speed: All speeds (supported)
Endpoint: Control transfer Endpoint 0
Device class: HID class (Ver1.1)
USB1.1 Standard: Universal Serial Bus Specification Revision 1.1
HID : Human Interface Device
Connector Specifications
1 VBUS (Power supply)
2 D- (- Signal)
3 D+ (+ Signal)
4 GND (Ground)