Operation Manual

101
5. Using On-Screen Menu
❻ Menu Descriptions & Functions [SETUP]
[GENERAL]
CorrectingKeystoneDistortionManually[KEYSTONE]
Youcancorrecthorizontalorverticalkeystone,pincushion,orcornerstonedistortionmanually.
NOTE:
• Someitemsarenotavailablewhenoneitemisactivated.Unavailableitemsareshowningrey.
• Tochangefromoneitemtoanotheritem,resettherstitem.
• Adjustmentvalueswillbeoverwritten.Theywillnotbedeletedevenwhentheprojectoristurnedoff.
• Using[KEYSTONE]correctioncancausetheimagetobeslightlyblurredbecausethecorrectionismadeelectronically.
KEYSTONE HORIZONTAL ��������� Corrects horizontal keystone distortion� (→ page 24)
KEYSTONE VERTICAL
��������������� Corrects vertical keystone distortion� (→ page 24)
PINCUSHION LEFT/RIGHT
�������� Corrects pincushion distortion at the left or right side�
PINCUSHION TOP/BOTTOM ����� Corrects pincushion distortion at the top or bottom side�
CORNERSTONE ������������������������ Fits a projected image within the border of the screen easily by align the four corner of an image
to the ones of the screen� (→ page 36)
RESET
��������������������������������������� Returns all the above items to the factory preset values�
Correctingpincushiondistortion
NOTE:
• The[PINCUSHIONLEFT/RIGHT]or[PINCUSHIONTOP/BOTTOM]itemisnotavailablewhen[KEYSTONEHORIZONTAL],[KEY-
STONEVERTICAL]or[CORNERSTONE]isactivated.
• Beforeperformingcorrection,setthelensshifttothecenterposition.
1. Press the ▼ or ▲buttontoselect[PINCUSHIONLEFT/RIGHT]or[PINCUSHIONTOP/BOTTOM].
2. Press the ◀ or ▶buttontocorrectdistortion.
3. Press ENTER button.