Operation Manual

161
7. Maintenance
2. Removethelamphousing.
(1)Loosenthetwoscrewssecuringthelamphousinguntilthephillipsscrewdrivergoesintoafreewheelingcondi-
tion.
 •Thetwoscrewsarenotremovable.
 •Thereisaninterlockonthiscasetopreventtheriskofelectricalshock.Donotattempttocircumventthis
interlock.
(2)Removethelamphousingbyholdingit.
CAUTION:
Makesurethatthelamphousingiscoolenoughtobeforeremovingit.
Interlock
Toreplacethelamp:
1. Removethelampcover.
(1)Loosenthelampcoverscrew
 •Thelampcoverscrewisnotremovable.
(2)Pushandslidethelampcoveroff.