User's Manual

(20/141)
5.5 Commands
"Command message format" depends on each command. Some commands are shown with usage. Refer to section
7 to 13.
5.5.1 Save Current Settings.
The controller requests for the monitor to store the adjusted value.
Ø Send "OC"(30h, 43h) as Save current settings command.
Ø Complete "Save Current setting" command packet as follows;
ASCII: 01h-30h-41h-30h-41h-30h-34h-02h-30h-43h-03h-CHK-0Dh
SOH-'0'-'A'-'0'-'A'-'0'-'4'-STX-'0'-'C'-ETX-CHK- CR
The monitor replies the packet for confirmation as follows;
SOH-'0'-'0'-'A'-'B'-'0'-'6'-STX-'0'-'0'-'0'-'C'-ETX-CHK- CR
STX
Command code
ETX
'0' 'C'