User Manual

English-5

English

Product Features

• DisplayPort and HDMI, which support 10-bit color depth.

• 5-setting, easy-to-switch picture mode (see page 13).

• Accurate color reproduction for high-end graphic design (see page 17).

• Quick warmup time.

• Picture-in-picture/picture-by-picture dual-screen mode includes real-time preview (see page 14).

• USB hub with two upstream ports (see page 14).

• MultiProﬁ ler extends color management feature, including automatic ICC proﬁ le updates (ICC proﬁ le Emulation,

Printer Emulation) (see page 17).

• Small footprint design.

Quick Start

For contents, please refer to the contents sheet.

To connect the LCD monitor to your system, follow these instructions:

NOTE: Make sure to read “Recommended Use” (page 3) before installation.

The accessories included will depend on the where the LCD monitor is to be shipped.

1. Turn off the power to your computer.

2. For a PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system

(Figure A.1). Tighten all screws.

For a PC with Analog output: Connect a 15-pin mini D-SUB to DVI-A signal cable to the connector of the display card in

your system (Figure A.2).

For a MAC with Thunderbolt output: Connect a Mini DisplayPort to DisplayPort adapter to the computer and then attach

the DisplayPort cable to the adapter and to the display (Figure A.3).

NOTE: Some Macintosh systems do not require a Macintosh cable adapter.

For a PC with DisplayPort output: Connect the DisplayPort cable to the connector of the display card in your system

(Figure A.4).

Figure A.1

Figure A.3

Macintosh Cable

Adapter

Figure A.2

Figure A.4

DisplayPort cable

NOTE: 1. Please use a DisplayPort Certiﬁ ed DisplayPort cable.

2. When removing the DisplayPort cable, hold down the top button to release the lock.

3. Please use a High Speed HDMI cable with HDMI logo.