User Manual

English-21
English
DIGITAL LONG
CABLE
(DVI/HDMI input only)
Compensates for image degradation caused by using a long cable.
A lower number produces less compensation.
DIGITAL LONG
CABLE (DP/Mini-DP*
1
input only)
Compensates for disturbed image caused by using a long DisplayPort cable.
There are 2 possible settings, 1 and 2. Setting “2” produces a better result, but may
reduce display colors. The default setting is “1”.
Tag4 AUTO ADJUST*
,
*
2
(Analog input only)
Automatically adjusts the Image Position and H.SIZE settings and FINE settings.
Press “SELECT” to activate Auto Adjustment. Please use test pattern, which is included
in the enclosed CD-ROM.
SIGNAL ADJUST*
(Analog input only)
Determines when the auto adjustment is activated automatically.
The choices are “SIMPLE” and “FULL”. Press “LEFT” or “RIGHT” to select.
H-size, Fine, H/V Position Contrast
SIMPLE O X
FULL O O
O: Automatic Adjustment X: No Automatic Adjustment
NOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.
AUTO ADJUST
LEVEL*
(Analog input only)
Determines the automatic adjustment level for AUTO ADJUST. The choices are “SIMPLE”,
“FULL” and “DETAIL”. Press “LEFT” or “RIGHT” to select. Refer to the below table.
Size, Fine, Position Contrast Black Level Time
SIMPLE O X X 1 second
FULL O O X 1.5 seconds
DETAIL* O O O 5 seconds
O: Automatic Adjustment X: No Automatic Adjustment
* “DETAIL” activates automatic long cable (skew, peaking) adjustment.
A-NTAA SW*
(Analog input only)
The Advanced No Touch Auto Adjust function is able to recognize new signals even
when neither the resolution nor the refresh rate has changed. If several PCs are
connected to the monitor, and each transmit very similar (or even the same) signals in
terms of resolution and refresh rates, the monitor recognizes that there is a new signal
and automatically optimizes the picture without the need for any action on the part of the
user.
OFF: A-NTAA is disabled.
ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimal
settings for the new signal. If no change in the signal is detected then A-NTAA does not
activate. The screen will be blank while the monitor optimizes the signal.
OPTION: Functions the same as ON, except that the screen does not go blank when the
monitor makes adjustments for changes in signal, allowing the monitor to display the new
signal faster. When using an external switching device to connect 2 or more PCs to the
monitor, using the ON or OPTION settings is suitable.
AUTO CONTRAST*
,
*
2
(Analog input only)
Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust.
Any adjustment requires the image to have white portions.
CONTRAST*
(Analog input only)
Adjusts the image brightness and contrast in relation to the background.
Press “LEFT” or “RIGHT” to adjust.
AUTO BLACK LEVEL*
,
*
2
(Analog input only)
Automatically adjusts the black level. Any adjustment requires the image to have black
portions. Press “SELECT” to activate AUTO ADJUST.
BLACK LEVEL*
(Analog input only)
Adjusts the RGB black level by input signal level.
VIDEO LEVEL
(HDMI input only)
NORMAL: For computer setting. Displays all input signals of 0-255 steps.
EXPAND: For audio-visual equipment setting. Expands input signals of 16-235 steps to
0-255 steps.
AUTO: Auto setting depending on the input signal.
Tag5 H.POSITION Controls Horizontal Image Position within the display area of the LCD.
Press “LEFT” or “RIGHT” to adjust.
V.POSITION Controls Vertical Image Position within the display area of the LCD.
Press “LEFT” or “RIGHT” to adjust.
* Only for PA242W.
*
1
Only for PA272W/PA302W.
*
2
This item does not reset by FACTORY PRESET (Tag7).