User Manual

English-25
English
* Only for PA302W.
*
2
This item does not reset by FACTORY PRESET (Tag7).
TagA TILE MATRIX The TILE MATRIX feature allows one image to be displayed over multiple screens. This
feature can be used with up to 25 monitors (5 vertical and 5 horizontal). Using TILE
MATRIX requires the PC output signal be sent through a distribution amplifi er to each
individual monitor.
H MONITOR: Select the number of horizontal displays.
V MONITOR: Select the number of vertical displays.
MONITOR No: Select a position to expand the screen.
TILE COMP: Works in tandem with TILE MATRIX to compensate for the width of the tile
bezels in order to accurately display the image.
Tile Comp with 4 monitors (black area shows monitor frames):
monitor1
monitor2
monitor3
monitor4
monitor1
monitor2
monitor3
monitor4
Tile Comp ONTile Comp OFF
NOTE: TILE MATRIX works only when PIP MODE is OFF.
TagB CARBON SAVINGS Displays the estimated carbon savings information in kg.
CARBON USAGE Displays the estimated carbon usages information in kg. This is the arithmetic estimation,
not actual measurement value. This estimation is based without any options.
COST SAVINGS Displays the electricity cost savings in balance.
CARBON CONVERT
SETTING
Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is
based on the OECD (2008 Edition).
CURRENCY
SETTING*
2
Displays electricity pricing (available in 6 currency units).
CURRENCY
CONVERT SETTING
Adjusts electricity prices-electric energy equivalent in the electrical rate saving
calculation.
HOURS RUNNING*
2
Show total running time.
SELF COLOR
CORRECTION
Uses the internal color sensor to compensate for a natural color shift that occurs with
age.
STAND-ALONE
CALIBRATION*
Compensates for a typical LCD yellowish color shift due to long-term usage by optional USB
color sensor. See page 33. When you use this function, SELF COLOR CORRECTION is not
necessary.
TagC INFORMATION*
2
Provides information about the current display resolution. Technical data, including the preset
timing currently being used and the horizontal and vertical frequencies is also displayed.