MOS Integrated Circuit Data Sheet

95
µ PD17062
10.4.2 Precautions When Transferring Data With Peripheral Registers
Data is transferred between the data buffer and peripheral registers in 8-bit or 16-bit units.
A PUT or GET instruction is executed for one instruction cycle (2 µ s) even if the data is 16 bits long.
When 8-bit data transfer is performed but the peripheral register execution data is seven bits, for example,
long one extra bit is added.
At data write, the status of this extra data is “Don’t care” as shown in Example 1. At data read, the status
of this extra data is “Unpredictable” as shown in Example 2.
Example 1. PUT instruction (When the valid peripheral register bits are seven bits from bit
0 to bit6.)
When 8-bit data is written to a peripheral register, the status of the eight high-order bits of the data buffer
(contents of DBF3 and DBF2) is “Don’t care”.
Of the 8-bit data in the data buffer, the status of each bit that does not correspond to a valid bit in the
peripheral register is “Don’t care”.
DBF3 DBF2 DBF1 DBF0
b
15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Peripheral register
b
7 b6 b5 b4 b3 b2 b1 b0
PUT
Data buffer
8
0 or unpredictable
Don't care Don't care
Don't care
(Can be any value)
Valid bits