CONTENTS INSTRUCTION MANUAL COLOUR TELEVISION REMOTE CONTROL & TV CONNECTIONS 4 IMPORTANT SAFEGUARDS 5 INSTALLATION 5 START UP 6 CONNECTING EXTERNAL EQUIPMENT 6 DAILY USE 7 MENUS DESCRIPTION 10 TELETEXT 15 TROUBLESHOOTING 18 SPECIFICATION 19 PF28WT100 3
REMOTE CONTROL & TV CONNECTIONS IMPORTANT SAFEGUARDS LOCAL CONTROL WATER AND MOISTURE The apparatus shall not be exposed to dripping or splashing water and no object filled with liquids, such as vases , should be placed on the apparatus. Front HEAT Never place the set near heat sources. Never put a naked flame, such as a candle, on the top of TV set.
START UP Front LANGUAGE MENU TV/AV SELECTION The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be used for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further. Allows to switch between TV and external modes.
PROGRAM SELECTION (FROM 0 TO 99) PICTURE CONTROL Direct selection Up / Down selection Use the remote control NUMBER 0….9 buttons (A3). For two digits program numbers, enter the second digit within 2 seconds. Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the TV set front panel PROGRAM UP / DOWN buttons (B9). SOUND CONTROL Volume adjustment Use the remote control VOLUME UP (A20) / DOWN (A7) buttons or the TV set front panel VOLUME UP / DOWN buttons (B8).
MENUS LANGUAGE SELECTION, CHILD LOCK, CLOCK SETTING, WAKE UP, NOISE REDUCTION PICTURE MENU (For operating instructions, see page 10, HOW TO USE THE SUB-MENUS) These functions are available in the Features menu (see description page 14). CHILD LOCK This function only allows the TV to be turned on using the remote control. Once the user has set this CHILD LOCK to ON or OFF, it will remain in this condition until the user changes it again.
INSTALL MENU (For operating instructions, see page 9, HOW TO USE THE SUB-MENUS) INSTALL Automatic tuning system Country Program list edition ATSS TV system modification AUS TV system EDIT Channel number Channel Frequency SYSTEM AUS Channel number CHANNEL C46 Channel Frequency FREQUENCY Channel name 671,25 NAME Channel name Channel skipping - You can select skip "YES" or "NO" using the remote control RED "Skip" button (A11).
TELETEXT FEATURES MENU See section near the end of section DAILY USE for a more detailed explanation of these functions. (For operating instructions see page 10, HOW TO USE THE SUB-MENUS) ENTERING/LEAVING TELETEXT MODE - Select the desired program with teletext. - Press the remote control TELETEXT ( ) button (A22) to select teletext mode. The initial page (or the last page viewed if you have already used teletext in the present channel) appears. 1. Adjust this value ON or OFF.
TELETEXT FORMAT PICTURE & SOUND CONTROL USEFUL TELETEXT FUNCTIONS INDEX button (A18): Allows you to return directly to the initial teletext page. SUBPAGE button PAGE HOLD button (A9): Any teletext page or subpage can be held on the screen by pressing the PAGE HOLD button. - The page number shown in the extreme top left corner of the screen will become red. - Press the HOLD button again to cancel hold mode (the page number will return to white).
TROUBLESHOOTING SPECIFICATION TV Standard Color system Sound system BBefore Asking for Service: SYMP TOMS Picture is OK, but no sound: Sound is OK, but no color: Overlapped Picture Image: •Is power cord plugged in? •Check if “Volume Down” is pressed. •Check if the “Volume Control” is set to the minimum position. •Check if the “Color Control” is set to the minimum position. •Check if the program on air is in color, or in black and white. •Check if the antenna installation and its connection are OK.
NEC Australia Pty. Ltd.