INSTRUCTION MANUAL COLOUR TELEVISION PF32WT100
TABLE OF CONTENTS IMPORTANT SAFEGUARDS IDENTIFICATION OF CONTROLS Main body (Front) Main body (Top) Main body (Side) Main body (Back) CONNECTING EXTERNAL EQUIPMENT TV/AV selection Connection to a camcoder or other video player Connection to Digital Audio REMOTE CONTROL Remote Control Hand Piece Battery Installation & Functions BASIC INSTALLATION Switching on TV set Automatic tuning MENU DESCRIPTION Main menu How to use the sub-menus Picture menu Sound menu Install menu Program list edit Feature menu SO
IMPORTANT SAFEGUARDS 1 Read Instructions All the safety and operating instructions should be read before the appliance is operated. 2 Retain Instructions 3 Heed Warnings The safety and operating instructions should be retained for future reference. All warnings on the appliance and in the operating instructions should be adhered to. 4 Follow Instructions All operating and use instructions should be followed. 5 Cleaning Unplug TV from the wall outlet before cleaning.
15 Overloading shock. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric Never push objects of any kind into this TV through openings as they may touch 16 Object and Liquid Entry dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV. 17 Servicing Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards.
IDENTIFICATION OF CONTROLS Main Body (Front) Left Speaker Right Speaker Center Speaker TIMER MAIN POWER POWER INDICATOR Main Body (Top) TV/AV 6 VOL CH MENU OK
Main Body (Side) AV2 INPUT Main Body (Back) Digital Audio Input (SPDIF) SPEAKER OUTPUT Sr-R 8 /5W WOOFER 8 /10W Sr-L 8 /5W Speaker Output DIGITAL AUDIO INPUT (SPDIF) AV 1 Input DVD INPUT Connection to Antenna Cable DTV INPUT Y Y Cb AV1 INPUT L Pb MONITOR OUTPUT VIDEO Power Cord L S-VIDEO AUDIO L (MONO) ANT Cr R Pr R AUDIO R Monitor Output DVD INPUT S-Video DTV INPUT 7
CONNECTING EXTERNAL EQUIPMENT TV/AV Selection Allows to switch between TV and external modes, By repeatedly pressing the remote control TV/AV or the TV top panel TV/AV button, the on-screen display is changed as shown : RF >AV 1 >AV 2 >DVD >DTV But it is changed according to whether you connect S-VIDEO 1(S-VIDEO 2) or not. If you connect S-VIDEO 1 (S-VIDEO 2), SVHS 1 (SVHS 2) is displayed instead of AV 1 (AV 2). That is, S-VIDEO 1 (S-VIDEO 2) & AV 1 (AV 2) can not be displayed at the same time.
SIDE (AV2 INPUT) Remark : You can’t connect with S-VIDEO & VIDEO at the same time. So user has to select the one of them. Connection to Digital Audio You can enjoy the high quality sound of Dolby Digital sound. What is Dolby Digital ? Dolby Digital is the surround sound technology recently used in theaters, and is now available to reproduce this realistic effect at home.
REMOTE CONTROL Remote Control Hand Piece TV mode A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 A26 TELETEXT mode POWER SOUND MUTE NUMBER 0..9 SLEEP TV / AV PROGRAM UP (CURSOR UP) VOLUME DOWN (CURSOR LEFT) . . . SKIP MOVE (LISTENING MODE) MODE ZOOM RECALL NORMAL OK/PRESET MENU VOLUME UP (CURSOR RIGHT) PROGRAM DOWN (CURSOR DOWN) TV > TELETEXT . . . DELETE A1 A2 A3 A4 A5 A6 POWER SOUND MUTE NUMBER 0..9 . .
BASIC INSTALLATION Switching On TV Set 1)If stand-by indicator is red, then the TV set is in stand-by mode. You can switch on using the remote control POWER button (A1), the NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons. The front panel PROGRAM UP/DOWN buttons can also be used. Once on, the stand-by indicator turns off and the picture appears on the screen. SWITCHING OFF TV SET 2) If stand-by indicator is not lit, then the TV set is powered off.
MENUS DESCRIPTION MAIN MENU All menus are removed within 25 seconds if you don't press any button. Press the remote control MENU button (A19) to display the main menu. Then, you have the choice between several sub-menus: PICTURE SOUND INSTALL FEATURES » « MENU POSITION EXIT OK ACCESS If you want to Exit the main menu, press the MENU button (A19) a second time. - To select one of the sub-menus, use the remote control CURSOR UP (A6), DOWN (A21) buttons.
PICTURE MENU -You can select the picture quality instantly. To Select the Picture Mode 1. Press the menu button to select the PICTURE and then displayed on the right appearances. By pressing the OK button or NORMAL button, the following three modes change cyclically. PICTURE FAVOURITE BRIGHTNESS CONTRAST FAVOURITE > NORMAL I > NORMAL II - The current selected picture mode is displayed in the menu header. - The FAVOURITE mode contains the settings that you last entered.
SOUND MENU To Select Listening Mode 1. Press the menu button to select the SOUND and to be displayed on the right appearance. By pressing the CURSOR LEFT (A7)/RIGHT (A20), the following five modes change cyclically. STEREO > SURROUND > CONCERT > JAZZ CLUB > CATHEDRAL LISTENING VOICE CLARITY SPEAKER SETUP CHANNEL DELAY AVL SPDIF INPUT POSITION EXIT » « - STEREO This mode operates differently according to input source.
5. CHANNEL DELAY feature provides you a variety of sound effect with delaying signal The user can give a delay to each speaker(C/Ls/Rs). To adjust the speaker delay, Press OK (A18). You can select a speaker by using CURSOR UP (A6) /DOWN (A21) buttons. SOUND LISTENING SURROUND VOICE CLARITY OFF SPEAKER SETUP Its range of delay: C 00ms ~05ms Ls/Rs 00ms ~ 15ms CHANNEL DELAY 6. AVL feature has On/Off according to your preference.
INSTALL MENU Automatic tuning system INSTALL Country Program list edition ATSS Channel number AUS Channel number EDIT Channel Frequency CHANNEL C46 FREQUENCY Channel name NAME Program number Program storage number Channel Frequency 671,25 Channel name ABCDEFG PROGRAM 09 STORE TO 09 Program number Program storage number WARNING : This television has been factory pretuned to channels 2, 7, 9, 10 and 28.
FEATURE MENU -TO SELECT CHILD LOCK 1) You can prevent the use of the TV set without the remote control. Press the MENU button to select the FEATURES and press the Cursor Up (A6)/Down (A21) to select the CHILD LOCK. 2) Press the Cursor Left (A7)/Right (A20) to change CHILD LOCK on/off. 3) Once the user has set this CHILD LOCK to on or off, it will remain in this condition until the user changes it again. CHILD LOCK ON WAKE TIME OFF WAKE PROG.
SOUND CONTROL VOLUME ADJUSTMENT Use the remote control VOLUME UP (A20) / DOWN (A7) buttons or the TV set front panel VOLUME UP / DOWN buttons. MUTE Mute the sound by pressing the remote control SOUND MUTE button (A2). Then, logo is displayed. The previous sound setting is returned after pressing the same button a second time. If a sound related function is used (e.g. VOLUME, ) then the MUTE will also be cancelled.
PICTURE CONTROL PICTURE SETTING You can select three pictures settings, by using the remote control NORMAL button (A17) : - Normal I (standard hard picture) - Normal II (standard soft picture) - Favourite For other adjustments: BRIGHTNESS, CONTRAST, COLOUR, SHARPNESS, NOISE REDUCTION, use the PICTURE menu. If an NTSC signal is received, then the TINT adjustment will also be available.
TELETEXT ENTERING / EXIT TELETEXT MODE - Select the desired program with teletext. - Press the remote control TELETEXT ( ) button (A22) to select teletext mode. The initial page (or the last page viewed if you have already used teletext in the present channel) appears. PAGE SELECTION - You can directly enter the 3 figure page number by using the remote control NUMBER 0...9 buttons (A3). - You can sequentially select teletext pages by pressing the remote control PAGE UP (A6) / DOWN (A21) buttons.
USEFUL TELETEXT FUNCTIONS INDEX button (A18): Allows you to return directly to the initial teletext page. SUBPAGE button (A10): Allows you to request a specific subpage: - Press the SUBPAGE button (A10). At the base of the screen a SUBPAGE menu will appear. This has a red subpage minus link, a green subpage plus link, plus a white background showing (e.g. for page 110), 110 / 0001. This is ready to accept the subpage number. - Enter directly the subpage number you want with the remote control NUMBER 0...
BEFORE CALLING SERVICE PERSONNEL Symptoms Correction Colour is not displayed and net pattern is displayed on the specific channel. Check the external antenna and cable TV conditions. Check whether you select the correct channel. Vertical and horizontal line and net pattern are displayed on the screen in a moment. Vibration is also displayed. Check the interference wave caused by car, neon sign, and high frequency. Check the strong interference radio wave from wave of other devices or radio station.
SPECIFICATION MODEL TV Standard PF32WT100 Colour system PAL, NTSC 3.58 / 4.43 (AV) Sound system B/G, D/K, I, H, M (AV) Rated voltage Power 220-240V ~, 50Hz Power on 160 W consumption Stand-by 1.2W Sound Output Main R/L 7W + 7W (10% THD, 80% MOD,At 1KHz,Listening :STEREO) 10% Power Surround R/L, Center 5W +5W ,5W (10%THD,SPDIF,Dolby Digital -20dBFs,1KHz, Listening : SURROUND Woofer Channel 7W (10%THD,SPDIF,Dolby Digital -20dBFs,100Hz,Listening : SURROUND) BAND : CH0 - CH4 [CH0(46.
NEC Australia Pty. Ltd.
