Operation Manual

108
5. Using On-Screen Menu
CuttingasignalfromtheEntryList[CUT]
1. Pressthe or buttontoselectasignalyouwishtodelete.
2. Pressthe, , , or buttontoselect[CUT]andpresstheENTERbutton.
 ThesignalwillbedeletedfromtheEntryListandthedeletedsignalwillbedisplayedontheclipboardatthebottom
of the Entry List.
NOTE:
• Thecurrentlyprojectedsignalcannotbedeleted.
• Whenthelockedsignalisselected,itwillbedisplayedingraywhichindicatesitisnotavailable.
TIP:
• DataontheclipboardcanbepassedontotheEntryList.
• DataontheclipboardwillnotbelostaftertheEntryListisclosed.
CopyingandpastingasignalfromtheEntryList[COPY]/[PASTE]
1. Pressthe or buttontoselectasignalyouwishtocopy.
2. Pressthe, , , or buttontoselect[COPY]andpresstheENTERbutton.
 ThecopiedsignalwillbedisplayedontheclipboardatthebottomoftheEntryList.
3. Pressthe or buttontomovetothelist.
4. Pressthe or buttontoselectasignal.
5. Pressthe, , , or buttontoselect[PASTE]andpresstheENTERbutton.
 Dataontheclipboardwillbepastedtothesignal.
DeletingallthesignalsfromtheEntryList[ALLDELETE]
1. Pressthe, , , or buttontoselect[ALLDELETE]andpresstheENTERbutton.
 Theconrmationmessagewillbedisplayed.
2. Pressthe or buttontoselect[YES]andpresstheENTERbutton.
NOTE: The locked signal cannot be deleted.