Operation Manual

138
5. Using On-Screen Menu
8 Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
TheRESETfeatureallowsyoutochangeadjustmentsandsettingstothefactorypresetfora(all)source(s)except
thefollowing:
[CURRENTSIGNAL]
Resetstheadjustmentsforthecurrentsignaltothefactorypresetlevels.
Theitemsthatcanberesetare:[PRESET],[CONTRAST],[BRIGHTNESS],[COLOR],[HUE],[SHARPNESS],
[ASPECTRATIO],[HORIZONTAL],[VERTICAL],[CLOCK],[PHASE],and[OVERSCAN].
[ALLDATA]
Resetalltheadjustmentsandsettingsforallthesignalstothefactorypreset.
AllitemscanberesetEXCEPT[ENTRYLIST],[LANGUAGE],[BACKGROUND],[FILTERMESSAGE],[SCREEN],
[GEOMETRICCORRECTION],[MULTI-SCREENCOMP.],[REF.WHITEBALANCE],[CONTROLPANELLOCK],
[SECURITY],[COMMUNICATION SPEED], [CONTROL ID], [SEAMLESS SWITCHING],[STANDBY MODE],
[FANMODE],[EDGEBLENDING],[REF.LENSMEMORY],[DATEANDTIME],[LAMPLIFEREMAINING],[LAMP
HOURSUSED],[FILTERHOURSUSED],[TOTALCARBONSAVINGS],[WIREDLAN],and[WIRELESSLAN].
Toresetthelampusagetime,see“ClearingLampHourMeter[CLEARLAMPHOURS]”below.
[ALL DATA (INCLUDING ENTRY LIST)]
Resetalltheadjustmentsandsettingsforallthesignalstothefactorypresetexcept[LANGUAGE],[BACKGROUND],
[FILTERMESSAGE],[SCREEN],[MULTI-SCREENCOMP.],[REF.WHITEBALANCE],[CONTROLPANELLOCK],
[SEAMLESSSWITCHING],[SECURITY],[COMMUNICATIONSPEED],[CONTROLID],[FANMODE],[EDGEBLEND-
ING],[GEOMETIRCCORRECTION],[REF.LENSMEMORY],[DATEANDTIME],[STANDBYMODE],[LAMPLIFE
REMAINING],[LAMPHOURSUSED],[FILTERHOURSUSED],[TOTALCARBONSAVINGS],[WIREDLAN],and
[WIRELESSLAN].
Alsodeletesallthesignalsinthe[ENTRYLIST]andreturnstothefactorypreset.
NOTE:LockedsignalsinEntryListcannotbereset.
ClearingLampHourMeter[CLEARLAMP1HOURS/CLEARLAMP2HOURS]
Resetsthelampclockbacktozero.Selectingthisoptiondisplayssubmenuforaconrmation.Select[YES]andpress
theENTERbutton.
NOTE:Elapsedtimeofthelampusewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after the
lamp has reached the end of its life. In this condition you cannot clear the lamp hour meter on the menu. If this happens, press the
HELPbuttonontheremotecontrolfor10secondstoresetthelampclockbacktozero.Dothisonlyafterreplacingthelamp.