Operation Manual

142

5. Using On-Screen Menu

NETWORK SETTINGS

Important:

• Consultwithyournetworkadministratoraboutthesesettings.

• WhenusingawiredLANconnection,connectaLANcable(Ethernetcable)totheLANport(RJ-45)oftheprojector.(→ page

173)

TIP:Thenetworksettingsyoumakewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

Hints on How to Set Up LAN Connection

To set up the projector for a LAN connection:

Select[WIREDLAN]or[WIRELESSLAN]→[PROFILES]→[PROFILE1]or[PROFILE2].

TwosettingscanbesetforwiredorwirelessLAN.

Nextturnonorofffor[DHCP],[IPADDRESS],[SUBNETMASK],and[GATEWAY]andselect[OK]andpressthe

ENTERbutton.(→page143)

To recall LAN settings stored in the proﬁle number:

Select[PROFILE1]or[PROFILE2]forwiredorwirelessLAN,andthenselect[OK]andpresstheENTERbutton.

(→page143)

To connect a DHCP server:

Turnon[DHCP]forwiredorwirelessLAN.Select[ON]andpresstheENTERbutton.TospecifyIPaddresswithout

usingtheDHCPserver,turnoff[DHCP].(→page144)

TosetonlyforwirelessLAN(NETWORKTYPEandWEP/WPA):

Select[PROFILE1]or[PROFILE2]forwirelessLAN,andthenselect[ADVANCED]and[OK]andpresstheENTER

button.TheAdvancedmenuwillbedisplayed.(→page145)

To select an SSID:

Select[ADVANCED]→[SITESURVEY]andpresstheENTERbutton.

SelectanSSIDandpressthe>buttontoselect[OK]andpresstheENTERbutton.

Ifyoudonotuse[SITESURVEY],typetheSSIDandselect[INFRASTRUCTURE]or[ADHOC].(→page145)

Toreceivelampreplacementtimeorerrormessagesviae-mail:

Select[ALERTMAIL],andset[SENDER'SADDRESS],[SMTPSERVERNAME],and[RECIPIENT'SADDRESS].

Last,select[OK]andpresstheENTERbutton.(→page156)

Toexecute[EASYCONNECTION]usingImageExpressUtility2.0orImageExpressUtility2forMac:

The[EASYCONNECTION]isamodethatcanabbreviatethetroublesomeLANsettingswhenusingtheImage

ExpressUtilityandconnectingthePCandprojectorviaawirelessLAN.

ImageExpressUtility2.0andImageExpressUtility2forMacarecontainedonthesuppliedNECProjectorCD-

ROM.

Touse[EASYCONNECTION],select[WIRELESSLAN]→[PROFILES]→[EASYCONNECTION].

NOTE:The[EASYCONNECTION]functionisavailableonWindows7,WindowsVistaorWindowsXPSP3.