Operation Manual

163
6. Connecting to Other Equipment
 Mounting the Optional Lens
Fiveseparatebayonetstylelensescanbeusedwiththisprojector.ThedescriptionsherearefortheNP27ZLlens.
Mountotherlensesinthesamemanner.
NOTE:
• Theprojectorandlensesaremadeofprecisionparts.Donotsubjectthemtoshockorexcessiveforces.
• Removetheseparatelysoldlenswhenmovingtheprojector.Ifnot,thelenscouldbesubjecttoshockwhiletheprojectorisbeing
moved,damagingthelensandthelensshiftmechanism.
• Turnoffthepowerandwaitforthecoolingfantostopandturnoffthemainpowerswitchbeforemountingorremovingthe
lens.
• Whendismountingthelensfromtheprojector,returnthelenspositiontothehomepositionbeforeturningoffthepower.Failureto
dosomaypreventthelensfrombeingmountedordismountedbecauseofnarrowspacebetweentheprojectorandthelens.
• Besuretoperform[CALIBRATION]afterinstallationorreplacementofthelens.(→ page 17, 126)Calibrationcorrectstheadjust-
able zoom and focus range.
The following lenses need calibration:
- NP26ZL,NP27ZL,NP28ZL,NP29ZL
• Nevertouchthelenssurfacewhiletheprojectorisoperating.
• Beverycarefulnottoletdirt,grease,etc.,onthelenssurfaceandnottoscratchthelenssurface.
• Performtheseoperationsonaatsurfaceoverapieceofcloth,etc.,topreventthelensfromgettingscratched.
• Whenleavingthelensofftheprojectorforlongperiodsoftime,mountthedustcapontheprojectortopreventdustordirtfrom
getting inside.
• Ifyouhavemultipleprojectors,becarefulofthefollowing:
- TheNP25FL,NP26ZL,NP27ZL,NP28ZL,andNP29ZLlensesaredesignedexclusivelyforthismodeloftheprojector.These
lensesarenotavailableonotherprojectormodels.
- TheotherNECoptionallensescannotbeusedwiththismodeloftheprojector.
Before mounting the lens:
• PrepareaPhillipsscrewdriver(plus-head)
• Removethedustcapfromtheprojector.
TIP:
• Theprojectorcomeswiththedustcapatthetimeofshipment
Mounting the lens
1. Removethelensshroud.
(1) Loosen two screws.
1
Lens release
lever
Safetylever
Lens shroud