Operation Manual

175
6. Installation and Connections
1. Pressthe buttontosettheprojectortothestandbymode,then
turnoffthemainpowerswitch.
2. Removetheplate(portcover).
Loosen the screw security port cover.
• Thescrewisnotremovable.
3. Slowly insert the wireless LAN unit into the USB (LAN) port
( ).
- RemovethewirelessLANunit’scap,settheunitwiththefront(the
sidewith the indicator)facingupwards,holdthe backedge and
insert the unit gently.
 Next,pressthewirelessLANunitinwithanger.
- ThecapyouhaveremovedwillbeusedwhenthewirelessLANunit
is removed, so store it in a safe place.
NOTE:IfthewirelessLANunitishardtoinsert,donotpushitinbyforce.
4. Attachtheanti-theftcapforwirelessLANunit.
 UsethescrewyouremovedatStep2tosecuretheanti-theftcap.
Plate
Anti-theftcap