Operation Manual

7
1. Introduction
Terminal Panel Features
1. COMPUTER1IN/ComponentInputConnector(MiniD-Sub15Pin)(→ page 13,166,171)
2. COMPUTER2IN/ComponentInputConnector(MiniD-Sub15Pin)(→ page 166,171)
3. COMPUTER3IN/Component(R/Cr,G/Y,B/Cb,H,V)Connectors(BNC×5)(→ page 166,171)
4. HDMIINConnector(TypeA)(→ page 167,168,172)
5. DisplayPortINConnector(DisplayPort20P)(→ page 167)
6. MONITOROUT(COMP1)Connector(MiniD-Sub15Pin)(→ page 169)
7. VIDEOINConnector(BNC)(→ page 170)
8. S-VIDEOINConnector(MiniDIN4Pin)(→ page 170)
9. LANPort(RJ-45)(→ page 173)
10.USBPort(TypeA)(→ page 78)
11.PCCONTROLPort(D-Sub9Pin)(→ page 233)
 UsethisporttoconnectaPCorcontrolsystem.Thisenablesyoutocontroltheprojectorusingserialcommunica-
tionprotocol.Ifyouarewritingyourownprogram,typicalPCcontrolcodesareonpage233.
12. REMOTE Connector (Stereo Mini)
 UsethisconnectorforwiredremotecontroloftheprojectorusingtheNECoptionalremotecontrol.
 Connecttheprojectorandoptionalremotecontrolusingacommerciallyavailablewiredremotecontrolcable.
NOTE:
• ConnectingtheremotecabletotheREMOTEminijackontheterminalpanelwillmakethewirelessoperationunavailable.
13.USB(LAN)Port (for optional Wireless LAN Unit) (→ page 174)
14. Optional Slot (SLOT) (→ page 219)
9 4 5 3 810 2 1 7
13 11 12 14 6