Operation Manual

26
2. Projecting an Image (Basic Operation)
Focus
Applicablelens:NP26ZL/NP27ZL/NP28ZL/NP29ZL
UsetheFOCUS(+)or(−)buttonontheprojectorcabinettoobtainthebestfocus.
TIP:Toobtainthebestfocus,performthefollowing(forxedinstallation)
Preparation:Warmuptheprojectorforonehour.
1.UsetheFOCUS+/−buttonstomakesureyouobtainthebestfocus.Ifyoudonot,movetheprojectorbackandforth.
2.Selectthe[TESTPATTERN]fromthemenuanddisplaythetestpattern.(→ page 105)
3.KeeppressingtheFOCUS−buttonuntilthegridofthetextpatternismadeinvisible.
4.KeeppressingtheFOCUS+buttonuntilyouobtainthebestfocus.
If you adjust beyond the best focal point, go back to step 3 and repeat the procedures.
NOTE:
• UsethefocusringtoobtainthebestfocusontheNP25FLlens.
Adjusting with buttons on the remote control
1. PresstheFOCUS/ZOOMbuttontodisplaytheadjustmentwin-
dow.
2. Usethe◀ or ▶buttontoadjustthefocus.
3. Press the FOCUS/ZOOM button again to close the adjustment
window.