Operation Manual

44
3. Convenient Features
ViewingTwoPictures
1. PressthePIPbuttonontheremotecontrol.
 ThePIP/PICTUREBYPICTURESOURCEscreenwillbedisplayed.
2. Usethe or buttontoselectthesourceandpresstheENTERbutton.
 ThePIPscreenorPICTUREBYPICTURE screen will be displayed,dependingonwhichwasselectedinthe
[MODE] setting screen.
3. PressthePIPbuttonagaintoreturntothenormalscreen(singlepicture).
TIP:
• Selectinganothersourcewillreturntothenormalscreen.
• Selectingasourcenotsupportedforthemainpictureorthesubpicturewillreturntothenormalscreen.
[POSITION]
Thisoptionallowsyoutoselectthepositionofasubpictureinthemainpicture.
NOTE:
• Thedefaultsettingis[BOTTOM-RIGHT].
Usethe or buttontoselectthesubpicture’spositionandpresstheENTERbutton.
Theoptionsare:TOP-LEFT,TOP-RIGHT,BOTTOM-LEFT,andBOTTOM-RIGHT.
Thefollowingadjustmentsandsettingsareavailableforthemainpictureonly.
-Adjustingpicture
-Magnifyingapicture
Thefollowingoperationsareavailableforboththemainandsubpictures.
-Picturemute
-Freezingamovingpicture