Operation Manual

81
4. Using the Viewer
 •Indexle(extension:.idx)
• Index les, which is converted by usingViewer PPT
Converter3.0,willappearintheThumbnailscreen.
 Only folders and JPEG files converted by using
ViewerPPTConverter3.0willappearintheThumbnail
screen.
• Toselectslideshowofindexles,openthe[PRESENTA-
TION]folderintheDRIVELISTscreen.
 However, index les will not appear. Only foldersand
JPEGleswillappear.
• UptofourindexfoldersinyourUSBandsharedfolder
aredisplayed.Thefourfolderswillbedisplayedinreverse
chronological order
• WhenyouinserttheUSBmemorydevicestoringindex
withtheViewerinoperation,thecontentoftheindexles
willbedisplayed.
NOTE:
• Theplaymode(MANUAL/AUTO)forslidesofindexleworksin
the following way:
 Incaseof[MANUAL]for[PLAYMODE]
 Whenyouselect[OPTIONS]→[SLIDESETTING]→[PLAYMODE]
→[MANUAL],indexleswillbesetformanualplaybackinregard-
lessofwhether[INTERVAL]isset.
 Incaseof[AUTO]selectedfor[PLAYMODE]
 Whenyouselect[OPTIONS]→[SLIDESETTING]→[PLAYMODE]
→ [AUTO], index les will be set for auto playback at intervals
speciedbyusing[INTERVAL].
 When,however,[-1]isselectedfor[INTERVAL],theplaymodewill
besetforautoplaybackaccordingtothesettingfor[OPTIONS]→
[SLIDESETTING]→[INTERVAL].
7. RemovetheUSBmemoryfromtheprojector.
 Returntothedrivelistscreen.MakesurethattheLEDon
theUSBmemoryisnotashingbeforeremovingtheUSB
memory.
NOTE:IfyouremovetheUSBmemoryfromtheprojectorwithaslide
displayed, the projector may not operate correctly. If this happens,
turn off the projector, turn off the main power switch, and unplug the
powercord.Wait3minutes,thenconnectthepowercord,turnon
the main power switch, and turn on the projector.
Exiting the Viewer
1. PresstheSOURCEbuttontoselectasourceotherthan
[VIEWER].
 ApressoftheSOURCEbuttonwilldisplaythesourceselect
screen.
 A few more presses of the SOURCE button will display
another source.
• To exit theViewer using the remote control, select a
sourceotherthan[VIEWER].
XXXX Motors