User’s Manual LCD Color Monitor AccuSync™ PV32 AccuSync™ PV40 AccuSync™ PV46
English English
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-2 Safety Precautions and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-3 Recommended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . English-4 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET.
Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MONITOR: CAUTION • Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: DO NOT OPEN THE MONITOR. There are no user-servicable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.
Recommended Use CAUTION Cleaning the LCD Panel CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN POSITIONING THE MONITOR: • When the liquid crystal panel becomes dusty or dirty, wipe gently with soft cloth. • Do not rub the LCD panel with coarse material. • Do not apply pressure to the LCD surface. • Do not use OA cleaner. OA cleaner will cause deterioration or discolor the LCD surface.
English Package Contents LCD Monitor Power Cord x 1 POWER POWER ON OFF User’s Manual - TV/DTV PICTURE ASPECT SOUND MENU FAVORITE MUTE INPUT MTS Q.
Part Names and Functions Control Panel 5 4 * 46inch model only 9 3 On/Off 2 1 8 6 7 1. D / E (Channel Up/Down) Selects a Channel or a menu item Switches the set on from standby. 6. POWER/STANDBY INDICATOR (r r) Glows red in standby mode. Glows blue when the set is switched on. 2. F / G (Volume Up/Down) Adjusts the volume. Adjusts menu settings. 7. REMOTE CONTROL SENSOR 3. MENU Selects a menu. 4.
- continued AV3 IN 5 AV OUT AC IN (R) AUDIO (L) VIDEO 1 (R) AUDIO (L) VIDEO Terminal Panel - APV32/APV40 10 * 40inch model only HDMI1 IN (DVI) HDMI2 IN (DVI) 9 HDMI3 IN (DVI) HDMI1 IN (DVI) AUDIO IN (RGB/DVI) HDMI2 IN (DVI) RGB IN (PC/DTV) 13 12 6 2 DIGITAL AUDIO (OPTICAL) OUT Y Pb Pr (L) AUDIO (R) 3 8 S-VIDEO IN COMPONENT IN RS-232 SERVICE 7 4 5 VIDEO (L) AUDIO (R) AV1 IN VIDEO (L) AUDIO (R) AV2 IN Air 1. AC IN Connects with the supplied power cord. 7.
Part Names and Functions - continued (R)AUDIO(L) 5 10 (R)AUDIO(L) AV OUT VIDEO AV3 IN VIDEO Terminal Panel - APV46 11 RS-232 HDMI1 IN (DVI) HDMI2 IN (DVI) 1 HDMI3 IN (DVI) 2 RGB IN (PC/DTV) 12 Y Pb AUDIO IN SERVICE (R)AUDIO(L) COMPONENT (RGB/DTV) 13 3 Pr 4 1. RS-232 PORT Connect to the RS-232 port on a PC. 2. HDMI1 IN (DVI) / HDMI2 IN (DVI) / HDMI3 IN (DVI) / RGB IN (PC/DTV) / AUDIO IN (RGB/ DTV) Connect the set output socket of the PERSONAL COMPUTER to this socket.
Remote Control Functions POWER 1 8. SOUND Recalls preferred sound settings. 9. MENU Activates menu. POWER ON 2 OFF 10. INPUT Selects input source. 11. MUTE Mutes audio output. 3 - 4 12. MTS Multi-track sound system selection. TV/DTV 5 PICTURE ASPECT SOUND 13. CC Closed captioning. 8 6 MENU FAVORITE 9 14 11 13 MUTE INPUT 10 7 12 15 MTS 14. FAVORITE Selects favorite channel. 15. EXIT Exits each mode. 16. CHANNEL UP/DOWN (D / E) Selects a channel or a menu item.
Part Names and Functions - continued Battery Installation The remote control is powered by two AAA batteries. 1. To insert batteries, turn the remote control handset over and remove the battery cover. 2. Put the two batteries into the compartment, observing battery polarity. 3. Replace the cover. To avoid damage from possible battery leakage, remove the batteries if the remote will not be used for an extended period time. Do mix old and new batteries. Do not mix battery types.
Connections English Additional equipment (VCRs, camcorders, etc.) can be connected to the set. Check with your equipment manufacturer's instructions for specific information. Unplug the set and all equipment before connecting to avoid damage to the set or equipment. Items shown may be different than actual equipment. Connect Antenna To connect an Antenna or Cable Service without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed.
Connections - continued Connect Cable TV ANT VIDEO (L) AUDIO (R) AV1 IN VIDEO (L) AUDIO (R) AV2 IN Subscription to a local cable TV service and cable converter required. For further cable TV information, contact a local cable service provider. Connection 1 1. Select 3 or 4 with channel switch on cable box. 2. Tune the TV channel to the same selected output channel of cable box. (R) AUDIO (L) VIDEO TV VCR RF Cable 3. Select channels at the cable box or with the cable box remote control.
Connections - continued Y Connect the DVD video outputs to the COMPONENT (Y, Pb, Pr) jacks and connect the DVD audio outputs to the AUDIO jacks. (L) AUDIO (R) Pr Pb COMPONENT IN English Connect DVD Player S-VIDEO IN Viewing Setup 1. Turn on the DVD player, insert a DVD. 2. Use the INPUT button on the remote control to select Component. Y PB PR (R) AUDIO (L) DVD 3. Refer to the DVD player's manual for operating instructions.
Connections - continued Connect Headphones Insert the headphone plug to the headphone socket of the set. < Side panel of the set > AV3 IN AV OUT (R) AUDIO (L) (R) AUDIO (L) VIDEO You can listen to the sound through the headphone. To adjust the headphone volume, press the F / G button. VIDEO Control the volume of the headphone to the appropriate level. Hearing for a long time with the high volume will damage the eardrum.
On and Off After the set is properly connected to the correct power outlet with the proper rating, it enters the standby mode. When the set is in standby mode, press the POWER, or the D / buttons on the remote control to switch it on fully. E Press the POWER button on the remote control to go back into the standby mode. Volume Adjustment Press the F / G button to adjust the volume. Press the MUTE button to silence the audio. Press MUTE, F / G, SOUND or the MTS buttons to cancel.
Basic Operation - continued Menu Use the on screen display menu to access various functions and features and to change settings of the set. Press the MENU button and then use D / menu. Press the G button and then use D / E E button to display each button to select a menu item. Press the G button to display the sub menu. Change the setting of an item in the sub menu with D / E or F / G. Move to the previous menu using the F button and move to the next menu using the G button.
Basic Operation Channel Programming For the Auto Program function to work properly, the TV must be receiving signals either from a cable-type source or over the air. STATION DTV Antenna Select Auto Program Press the MENU button and then use D / STATION menu. E button to select the Manual Favorite Channel DTV Channel Edit Press the G button and then use D / (Digital TV) Antenna Select. E button to select DTV Press the G button and then use D / Cable.
Basic Operation - continued Add/Delete Channels You can manually add or delete individual channels. The channel being displayed is either added to or erased from memory. STATION DTV Antenna Select Auto Program Press the MENU button and then use D / STATION menu. E button to select the Manual Favorite Channel DTV Channel Edit Press the G button and then use D / E button to select Manual. Press the G button and then use D / E button to select Channel.
- continued Fine Tuning Adjusts poor picture stability and image quality. STATION DTV Antenna Select Press the MENU button and then use D / STATION menu. E button to select the Auto Program Manual Favorite Channel Press the G button and then use D / E button to select Manual. Press the G button and then use D / E button to select Fine. Use the F / G DTV Channel Edit button to adjust the picture to your preference. OK MENU Repeatedly press the MENU button to return to normal TV viewing.
Basic Operation - continued Favorite Channel Favorite Channel lets you quickly tune in up to 8 channels of your choice without having to wait for the TV to scan through all the in-between channels. STATION DTV Antenna Select Auto Program Manual Press the MENU button and then use D / STATION menu. Press the G button and then use D / Channel. E E Favorite Channel button to select the DTV Channel Edit button to select Favorite Press the G button and then use the D / favorite channel position.
- continued DTV Channel Edit The Edit function enables the user to delete or skip stored channels or to move to programmed channels to different positions. STATION DTV Antenna Select Auto Program Press the MENU button and then use D / STATION menu. E button to select the Manual Favorite Channel DTV Channel Edit Press the G button and then use D / Channel Edit. E button to select DTV Press the G button and then use the D / channel.
Basic Operation - continued Color Temperature Press the MENU button and then use D / PICTURE menu. E button to select the PICTURE Color Temperature Picture Mode Press the G button and then D / Temperature. E Press the G button and then D / temperature. E Contrast button to select Color Brightness Color Sharpness button to select the desired color Tint Repeatedly press the MENU button to return to normal TV viewing. OK - You can adjust red, green, or blue to any color temperature you prefer.
- continued Picture Mode Picture Mode adjusts the TV for the best picture appearance. PICTURE Color Temperature Press the MENU button and then use D / PICTURE menu. E button to select the Picture Mode Contrast Brightness Press the G button and then use D / Mode. E Color button to select Picture Sharpness Tint Press the G button and then use D / E button to select a picture setting on the Picture Mode pulldown menu. OK MENU Repeatedly press the MENU button to return to normal TV viewing.
Basic Operation - continued Picture Format You can watch TV in various picture formats; 16:9, 14:9, 4:3, ZOOM1, ZOOM2, and SPECTACLE. 1. Press the ASPECT button repeatedly to select a desired picture format. • You can only select 16:9, 14:9, 4:3, ZOOM1, ZOOM2, SPECTACLE in TV, AV1, AV2, AV3, and S-Video modes only. • You can select 16:9, 4:3 in Component, PC-RGB, HDMI, and DTV mode only.
Basic Operation - continued Sound Mode helps to provide the best sound without any special adjustment because the TV sets the appropriate sound options based on the channel content. English Sound SOUND Sound Mode Balance Auto Volume Press the MENU button and then use D / SOUND menu. E button to select the SRS TruSurround XT Audio Language TV Speaker Press the G button and then use D / E button to select Sound Mode.
Basic Operation - continued Balance You can adjust the sound balance between the speakers to the levels you prefer. SOUND Sound Mode Balance Press the MENU button and then use D / SOUND menu. E button to select the Auto Volume SRS TruSurround XT Audio Language TV Speaker Press the G button and then use D / E button to select Balance. Press the G button and then use F / adjustments. G button to make appropriate OK MENU Repeatedly press the MENU button to return to normal TV viewing.
Basic Operation R TruSurround XT SRS TruSurround XT is a trademark of SRS Labs, Inc. English SRS TruSurround XT - continued SOUND Sound Mode TruSurround XT technology is incorporated under license from SRS Labs, Inc. Balance Auto Volume SRS TruSurround XT Audio Language Manufactured under license form Dolby Laboratories. TV Speaker Press the MENU button and then use D / SOUND menu. E button to select the Press the G button and then use D / TruSurround XT.
Basic Operation - continued Audio Language (Digital Mode only) This function lets you select preferred audio language. SOUND Sound Mode Press the MENU button and then use D / SOUND menu. E button to select the Balance Auto Volume SRS TruSurround XT Press the G button and then use D / Language. E Press the G button and then use D / French or Spanish.
Stereo/SAP Broadcasts Setup The TV can receive MTS stereo channels and any SAP (Secondary Audio Program) that accompanies the stereo channel, if the broadcaster transmits an additional sound signal as well as the original one. STEREO: The primary language is heard from left and right speakers. Signal mode is stereo. SAP: The secondary language is heard from left and right speakers. MONO: The same primary language is heard from left and right speakers. Signal mode is mono. • Press the MTS button repeatedly.
Basic Operation - continued Clock Auto TIME The digital channel signal includes information for the current time provided by the broadcasting station and sets the clock automatically. Clock Off Time On Time Auto Sleep Set the clock manually if the time is set incorrectly by the auto clock function. Press the MENU button and then D / menu. E Time Zone Daylight Saving button to select the TIME Press the G button and then D / E button to select Clock.
Basic Operation - continued The off timer automatically switches the set to standby after a preset time. English On/Off Time TIME Clock Off Time Press the MENU button and then D / menu. E button to select the TIME On Time Auto Sleep Time Zone Press the G button and then D / Time. E button to select Off Time or On Press the G button and then D / E button to select On. Daylight Saving OK To cancel Off/On Time function, press the D / Off.
Basic Operation - continued Auto Sleep If you select On in the Auto Sleep menu, the set will automatically switch itself to standby mode approximately ten minutes after it stops receiving external signals. TIME Clock Off Time On Time Press the MENU button and then D / menu. E Auto Sleep button to select the TIME Time Zone Daylight Saving Press the G button and then D / E button to select Auto Sleep. Press the G button and then D / E button to select On or Off.
Basic Operation - continued If your area observes Daylight Saving time, turn this setting On. English Daylight Saving (Digital Mode only) TIME Clock Press the MENU button and then D / menu. E button to select the TIME Off Time On Time Auto Sleep Press the G button and then D / E Time Zone button to select Daylight Saving. Daylight Saving Press the G button and then D / E button to select Auto, On or Off. Repeatedly press the MENU button to return to normal DTV viewing.
Basic Operation - continued Child Lock The TV can be set so that the remote control handset is required to control it. This feature can be used to prevent unauthorized use of the control buttons on the unit. SETUP Language PC Control WXGA Press the MENU button and then D / menu. E VGA button to select the SETUP Child Lock Front Light Press the G button and then D / E Press the G button and then D / E Caption button to select Child Lock. Set ID button to select On or Off.
Basic Operation - continued Use the CC button repeatedly to select the Closed Captions. English Closed Caption SETUP Language Not available in Component, RGB-PC, and HDMI modes. PC Control WXGA Press the MENU button and then D / menu. E VGA button to select the SETUP Child Lock Front Light Press the G button and then D / E Press the G button and then D / selection. E Caption button to select Caption.
Basic Operation - continued Closed Caption (Digital Mode) Press the CC button repeatedly to select Closed Caption method. SETUP Language Customize The DTV/CADTV captions that appear on your screen. PC Control WXGA VGA Not available in Component and RGB-PC modes. Child Lock Press the MENU button and then D / menu. Press the G button and then D / E E Front Light button to select the SETUP Caption Set ID button to select Caption. OK Press the G button and then D / selection.
Basic Operation Lock Menu Options - continued Parental Control can be used to block specific channels, ratings, and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period.
Basic Operation - continued Lock System Press the MENU button and then use D / LOCK menu. Then, press the G button. E button to select the LOCK Lock System Set Password Rating If Lock is already set, enter the password. Input Block The initial password is “0-0-0-0”. Setting Lock on/off Enables or disables the blocking scheme you set up previously. OK Press the D / E MENU button to select Lock System. Press the G button and then use D / E button to select On or Off.
Basic Operation - continued To Select Canadian / English / French rating system press the D / button to select Rating. E English Rating LOCK Lock System Set Password Press the G button and then use D / Limit or Canadian. E Press the G button and then use D / ratings to block. E Press the D / E/ F / G Rating button to select TV Rating Input Block button to select type of button to select your rating selection. OK MENU Press the OK button to lock or unlock.
Basic Operation - continued Input Block Select an external source to block. LOCK Lock System Press the D / E button to select Input Block. Set Password Rating Input Block Press the G button and then use D / E button to select a source. Press the G button and then use F / Unblocked for each source. G button to select Blocked or Repeatedly press the MENU button to return to normal TV viewing.
Basic Operation - continued The following items can be selected or adjusted: Horizontal/Vertical position, Clock, Phase, and Auto Program. English PC Setup SETUP Language PC Control Press the MENU button and then use D / SETUP menu. E button to select the WXGA VGA Child Lock Press the G button and then use D / E Front Light button to select PC Control. Caption Press the G button and then D / picture item.
Basic Operation - continued WXGA or VGA (PC-RGB Mode only) When a WXGA signal is present, select the desired resolution. SETUP Language PC Control WXGA VGA Child Lock Front Light Caption Set ID OK MENU SETUP Language 1024X768 PC Control 1280X768 WXGA 1360X768 VGA 1366X768 Child Lock Front Light Caption Set ID OK MENU Information (Digital Mode only) This function shows the present input information. Ch 9-1 KBS D1 Speed Press the INFO button while watching DTV.
Basic Operation - continued English Picture in Picture PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image. Press the PIP button to show the sub picture. Each press of PIP button changes the screen display as shown below.
Basic Operation - continued PIP Audio Output PIP mode - main and sub picture audio select. Press the MENU button and then use D / Main/PIP menu. E Main/PIP Main Input Main Aspect Ratio PIP Mode PIP Input PIP Size PIP Position Audio Output button to select the Press the G button and then use D / Output. E button to select Audio Press the G button and then use D / E button to select Main or Sub. OK Repeatedly press the MENU button to return to normal TV viewing.
Basic Operation - continued English Channel selection for sub picture (Sub picture only TV mode) Press the PIP CH +/- button. The selected channel number is displayed just below the channel number of main picture. Channel Scan Press the PIP POSITION button. Look at all of the stored channels on 9 windows. Press the SCAN button to show all 9 windows on the screen. Press the EXIT button to return to normal viewing. Swapping the PIP Press the SWAP button to switch between the Main and Sub pictures.
Basic Operation - continued External Control Device Setup Connect the RS-232 input jack to a control device (such as a computer or an A/V control system) in order to control the set’s functions externally. Connect External Equipment < Back panel of the set > Y Pb Pr (L) AUDIO (R) COMPONENT IN S-VIDEO IN RS-232 SERVICE Connect the serial port of the control device to the RS-232 jack on the set. RS-232 connection cables are not supplied with the Monitor.
Basic Operation - continued English Set ID SETUP Press the MENU button and then D / menu. E Language button to select the SETUP PC Control WXGA Press the G button and then D / E Press the G button and then F / the desired monitor ID number. G VGA button to select Set ID. Child Lock Front Light button to adjust Set ID to choose Caption Set ID The adjustment range of Set ID is 1 ~ 99. OK MENU Use this function to specify a monitor ID number.
Basic Operation - continued RGB Mode / HDMI Mode MODE DOS Resolution Vertical Frequency (Hz) 640X350 70.0 720X400 70.0 85.0 60.0 VGA 640X480 72.0 75.0 85.0 56.0 60.0 SVGA 800X600 72.0 75.0 85.0 60.0 XGA 1024X768 SXGA 1280X1024 70.0 75.0 85.0 60.0 60.0 1280X768 WXGA 1360X768 60.0 1366X768 60.0 480p/60 720p/50 DTV 75.
ASPV32-AVT Panel Audio Input ASPV40-AVT ASPV46-AVT Size (Diagonal) 80cm/32” 101cm/40” 116cm/46” Aspect Ratio 16:9 16:9 16:9 Resolution WXGA (1366x768) WXGA (1366x768) WXGA (1366x768) Brightness 500 cd/m2 500 cd/m2 500 cd/m2 Contrast Ratio 5000:1 (Dynamic) 5000:1 (Dynamic) 5000:1 (Dynamic) Viewing Angle over 178 º over 178 º over 178 º Color Depth 16.7M colors 16.7M colors 16.
Troubleshooting Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in picture Poor reception on some channels No color Poor color Remote control does not work Incorrect position Vertical bars or stripes on background Horizontal noise Signal Cable message appears Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on Try another channel (weak signal) Check aerial (plugged into TV?) Check aerial (b
NEC Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (800) 632-4662 Warranty Information: www.necdisplay.com Online Technical Support: www.necdisplay.com Sales Information Line: Canadian Customers: Government Sales: Government Sales email: Sales and Product Information (888) 632-6487 (866) 771-0266, Ext#: 4037 (800) 284-6320 gov@necdisplay.
Limited Warranty NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NEC DISPLAY SOLUTIONS’ sole option) any part of the enclosed unit which proves defective for a period of one (1) years from the date of first consumer purchase. Spare parts are warranted for ninety (90) days.
APV32, APV40, APV46 PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Display Solutions of America, Inc. and/or its licensors, as appropriate, reserve all patent, copyright and other proprietary rights to this document, including all design, manufacturing, reproduction, use and sales rights thereto, except to the extent said rights are expressly granted to others.
