User's Manual

September 2003 NEC Business Solutions Ltd
38 – Chapter 3 Caller ID - Incoming C-6
Doc. No. 8283 - Release 1.0 September 2003
Caller ID - Incoming C-6
FEATURE
DESCRIPTION
Caller ID displays the calling party telephone number and/or name on the
LCD of the Multiline Terminal for CO incoming calls. Up to 16 Multiline
Terminals that have CO ringing and/or CAR appearance assigned can
automatically display Caller ID information during an incoming call. Multiline
Terminals that are not part of these 16 terminals can display Caller ID if they
have the appropriate class of service by manual operation. After the CO call
has been answered the Caller ID information will follow the call wherever it is
transferred to.
When the MIFM-U( ) ETU with KMM( )UA is installed, the Caller ICD
information can be displayed for the last 50 incoming calls by using
the Caller ID Scroll key, if assigned.
SYSTEM
AVAILABILITY
Terminal Type
All Multiline Terminals with an LCD.
Required Components
COID(4)-U( ) ETU, COID(8)-U( ) ETU, BRT(4)-U( ) ETU, or PRT(1)-U( )
ETU to receive Caller ID indication from a central office.
MIFM-U( ) ETU with KMM( )UA installed when Caller ID Scrolling or Call
Return are desired.
OPERATING
PROCEDURES
Press the Scroll/Directory key to display the last incoming Caller ID.
Repeatedly press the Scroll/Directory key to display additional
Caller ID names/numbers. (A maximum of 50 Caller ID names/numbers
are displayed.)

The Scroll key is programmed in System Programming using the Line Key
Selection for the Telephone Mode Memory Block. Refer to the System
Programming Manual for instructions.
Go off-hook. The system automatically accesses an outside line and dials the
ID number displayed on the LCD.
To display a stored Caller ID:
To return a call to the name/number displayed on the LCD: